Alpine C701 Owners Manual - Page 7

Installation Mounting the control unit CAUTION: Do not install the control unit near the air-bag of the front passenger's seat. • Confirm the installation location will be safe. • Determine the mounting position on the dashboard. The area should be large enough to center the unit and reasonably flat. Installation using Velcro fastener Velcro fastener Control unit Dashboard 3 Mount the control unit using the included screws. Bracket Spacer Control unit Pan head screw (M3 x 5) x 2 4 Mount the previously removed inner case into the dashboard. Slide the control unit into the case. Dashboard FR Inner case 1. Without separating the two pieces of Velcro fastener, peel off the paper backing on one side and place on the back of the control unit. 2. Make sure the location selected is free from moisture or dirt. Peel off the backing paper from the other side of the Velcro fastener on the control. 3. Place the control unit on the mounting location and press the unit firmly to mount securely. Mounting other units 1 Remove the face plate. Face plate 2 Use a screwdriver, etc., to slide the locking pin, then take out the inner case. Inner case Locking pin Face plate 1 After step 2 on "Mounting other units" of "Mounting the control unit", remove the side bracket. Side bracket ES DE Side bracket 2 Mount the control unit using the included screws. IT Bracket Spacer Control unit Pan head screw (M3 x 5) x 2 SE 5-EN