Alpine CDA 9820XM Operating Instructions - Page 9

Radio SOURCE/ POWER TUNE/ BAND/ A.ME TEL. SEARCH/QS g f Rotary encoder Preset buttons (1 through 6) Listening to Radio 1 Press SOURCE/POWER until a radio frequency appears in the display. 2 Press BAND/TEL. repeatedly until the desired radio band is displayed. F1 (FM1) → F2 (FM2) → AM → F1 (FM1) 3 Press TUNE/A. ME to select the tuning mode. DX SEEK (Distance mode) → DX SEEK (Local mode) → DX SEEK(Manual mode)→ DX SEEK • Only the portions underlined above are displayed. • The initial mode is DX SEEK (Distance mode). Distance mode: Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning). Local mode: Only strong stations will be automatically tuned in (Automatic Seek Tuning). Manual mode: The frequency is manually tuned in steps (Manual tuning). 4 Press g or f to tune in the desired station. Holding down g or f will change the frequency continuously. • The ST indicator appears on the display when a stereo FM station is tuned in. Manual Storing of Station Presets 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory. 2 Press and hold any one of the preset buttons (1 through 6) that you want to store the station on for at least 2 seconds. The selected station is stored. The display shows the band, preset no. and station frequency memorized. • A total of 18 stations can be stored in the preset memory (6 stations for each band; F1, F2 and AM). • If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station. Automatic Memory of Station Presets 1 Press BAND/TEL. repeatedly until the desired radio band is displayed. 2 Press and hold TUNE/A. ME for at least 2 seconds. The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into buttons 1 to 6 in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in preset location no. 1. • If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. Tuning to Preset Stations 1 Press BAND/TEL. repeatedly until the desired band is displayed. 2 Press any one of the station preset buttons (1 through 6) that has your desired radio station in memory. The display shows the band, preset number and frequency of the station selected. Station Title Search Function If titles for radio stations are entered, you can search for a radio station from its title. . 1 Press SEARCH/QS in Radio mode to switch to Title Search mode. The first title input blinks in the display. 2 Select the desired title by turning the Rotary encoder within 10 seconds. 3 Press the Rotary encoder to receive the frequency of the selected title. • Search mode in Title Search mode is canceled by pressing and holding SEARCH/QS for at least 2 seconds. • If a station has no title, "NO TITLE" is displayed for 2 seconds. • Any radio station can be searched by the Station Title Search function. The station titles are displayed in the order they were input. Quick Search Function You can search for a radio station by its frequency. 1 Press and hold SEARCH/QS for at least 2 seconds in Radio mode to activate Quick Search mode. 2 Turn the Rotary encoder within 10 seconds to select the desired frequency. 3 Press the Rotary encoder to receive the selected frequency. • Search mode in Quick Search mode is canceled by pressing and holding SEARCH/QS for at least 2 seconds. 9-EN