Alpine CDE-103BT Cde-103bt Owner's Manual (english) - Page 24

USB Memory Connection (Optional) Connect USB memory 1 Open the cover of the USB connection terminal. 2 Connect the USB memory directly to the USB connection terminal, or via the USB cable. This unit USB Connection Terminal USB memory (Sold Separately) iPhone/iPod (Optional) SOURCE/ Rotary encoder 1 2 45 6 or USB memory Cable (Sold (Sold Separately) Separately) Remove USB memory 1 Carefully, pull out the USB memory from the USB cable or the USB connection terminal. 2 Close the cover of the USB connection terminal. • Change to a source other than the USB memory mode, then remove the USB memory. If the USB memory is removed in the USB memory mode, data may be damaged. • When removing USB memory, pull it out straight. • If sound is not output or USB memory is not recognized even when USB memory is connected, remove USB memory once, then connect it again. • Route the USB cable away from other cables, etc. • After removing the USB memory, close the cover of the USB connection terminal to prevent dust or foreign objects from entering and causing a malfunction. About MP3/WMA/AAC File of USB Memory Playing back MP3/WMA/AAC MP3/WMA/AAC files are prepared, then stored to a USB memory. This unit can recognize at least 100 folders (including root folder) and 100 files per folder stored in USB memory. Playback may not be performed if a USB memory exceeds the limitations described above. Do not make a file's playback time more than 1 hour. Media supported This device can play back USB memory media. Corresponding File Systems This device supports FAT 12/16/32 for USB memory device. / /MUTE /ESC /ENT Preset buttons (1 through 6) VIEW An iPhone/iPod can be connected to this unit by using the proprietary ALPINE FULL SPEED Connection Cable (KCE-433iV) (sold separately). When this unit is connected by using the cable, the controls on the iPod are not functional. • Set AUX+ SETUP to OFF when an iPhone/iPod is connected (refer to "Setting the AUX+ SETUP Mode" on page 17). • If you connect an iPhone to this unit, it can be used as an iPod. If you use iPhone as a hands-free phone, use the unit in which the BLUETOOTH function is built. • Internet and telephone functions of iPod touch or iPhone, etc., can also be used when connecting to the unit. However, using these functions will stop or pause the playing songs, at this time do not operate the unit to avoid a malfunction. • Do not leave an iPhone/iPod in a car, as its mechanism is sensitive to high temperature and humidity conditions, and damage may result. iPhone/iPod models usable with this unit • Confirmed devices regarding Made for iPod. iPod touch (2nd generation): version 2.2 iPod nano (4th generation): version 1.0.3 iPod classic (120 GB): version 2.0.1 iPod touch (1st generation): version 2.2 iPod nano (3rd generation): version 2.0 iPod classic (80, 160 GB): version 1.1.2 iPod nano (2nd generation): version 1.1.3 iPod with video: version 1.3 iPod nano (1st generation): version 1.3.1 • Confirmed devices regarding Works with iPhone. iPhone 3G: version 2.2 iPhone: version 2.2 • For clarity in identifying your model of iPod, please see Apple's own document "Identifying iPod models" at http://support.apple.com/kb/HT1353. • This unit does not support video playback from iPhone/iPod, even using a video-compatible cable. • If the unit is used with versions of iTunes earlier than 8.1, correct function and performance are not guaranteed. 22-EN