Alpine CDE-110 Owner's Manual (english) - Page 1
Alpine CDE-110 Manual
View all Alpine CDE-110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
R MP3/*WMA/CD Receiver *CDE-110UB does not support WMA EN CDE-110/CDE-110C CDE-110E/CDE-110UB • OWNER'S MANUAL Please read before using this equipment. ALPINE ELECTRONICS OF ASIA PACIFIC CO.,LTD. 555 Rasa Tower 1, Unit 2601-2602, 26th Floor, Phaholyothin Road, Chatuchak, Chatuchak, Bangkok 10900, Thailand Phone 02-937-0505 www.alpine-asia.com ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 161-165 Princes Highway, Hallam Victoria 3803, Australia Phone 03-8787-1200 ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS GmbH Wilhelm-Wagenfeld-Str. 1-3, 80807 München, Germany Phone 089-32 42 640 ALPINE ELECTRONICS OF U.K. LTD. Alpine House Fletchamstead Highway, Coventry CV4 9TW, U.K. Phone 0870-33 33 763 ALPINE ELECTRONICS FRANCE S.A.R.L. (RCS PONTOISE B 338 101 280) 98, Rue de la Belle Etoile, Z.I. Paris Nord Il, B.P. 50016, 95945 Roissy Charles de Gaulle Cedex, France Phone 01-48638989 ALPINE ITALIA S.p.A. Viale C. Colombo 8, 20090 Trezzano Sul Naviglio (MI), Italy Phone 02-484781 ALPINE ELECTRONICS DE ESPAÑA, S.A. Portal de Gamarra 36, Pabellón, 32 01013 Vitoria (Alava)-APDO 133, Spain Phone 945-283588 ALPINE ELECTRONICS (BENELUX) GmbH Leuvensesteenweg 510-B6, 1930 Zaventem, Belgium Phone 02-725-13 15 Operating Instructions WARNING DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS. Doing so may result in personal injury or damage to the product. WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. CAUTION This symbol means important instructions. Failure to heed them can result in injury or material property damage. DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident. KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISES WHILE DRIVING. Excessive volume levels that obscure sounds such as emergency vehicle sirens or road warning signals (train crossings, etc.) can be dangerous and may result in an accident. LISTENING AT LOUD VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING DAMAGE. MINIMIZE DISPLAY VIEWING WHILE DRIVING. Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident. DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock. USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.) Failure to do so may result in fire, etc. KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a physician immediately. USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may result in fire or electric shock. DO NOT BLOCK VENTS OR RADIATOR PANELS. Doing so may cause heat to build up inside and may result in fire. USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed application may result in fire, electric shock or other injury. HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing. PRECAUTIONS Product Cleaning Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic. Temperature Be sure the temperature inside the vehicle is between +55°C (+131°F) and -10°C (+14°F) before turning your unit on. Moisture Condensation You may notice the CD playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate. Damaged Disc Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism. Maintenance If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing. 1 Never Attempt the Following Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is off. Inserting Discs Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc. Make sure the label side is facing up when you insert the disc. Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player. New Discs To prevent the CD from jamming, the LCD is displayed as error if discs with irregular surfaces are inserted or if discs are inserted incorrectly. When a new disc is ejected immediately after initial loading, use your finger to feel around the inside of the centre hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ballpoint pen or other such instrument, then insert the disc again. Centre Hole Centre Hole New Disc Bumps Outside (Bumps) Irregular Shaped Discs Be sure to use round shape discs only for this unit and never use any special shape discs. Use of special shape discs may cause damage to the mechanism. Installation Location Make sure this unit will not be installed in a location subjected to: • Direct sun and heat • High humidity and water • Excessive dust • Excessive vibrations Correct Handling Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc. CORRECT INCORRECT CORRECT Disc Cleaning Fingerprints, dust, or soil on the surface of the disc could cause the CD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the centre of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc. Disc Accessories There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine CD players. Transparent Sheet Disc Stabilizer 2 CD/MP3/WMA SOURCE/ BAND/ / 4(M.I.X.) 6(RPT) 5(SCAN) Note * CDE-110UB does not support WMA. Playback 1 Insert a disc with the label side facing up. The disc will be pulled into the unit automatically, and the " DISC IN" indicator lights up . When a disc is already inserted, press SOURCE/ to switch to the DISC mode. The mode will change every time the button is pressed. RADIO CD* 1 USB * 2 AUX RADIO * 1 Displayed only when a disc has been inserted. * 2 Displayed only when USB memory is connected. 2 While playing back MP3/WMA, press or to select the desired folder. 3 Press or to select the desired track (file). Returning to the beginning of the current track (file): Press . Fast backward: Press and hold . Advancing to the beginning of the next track (file): Press . Fast forward: Press and hold . 4 To pause playback, press BAND/ / . Pressing BAND/ / again will resume playback. 5 To eject the disc, press . • Do not remove a CD during its eject cycle. Do not load more than one disc at a time. A malfunction may result from doing either. • The " DISC IN" indicator lights up when a disc is inserted. • Three-inch (8 cm) CDs cannot be used. • The CD-player can play discs containing audio data, MP3 data, and WMA data. • WMA format files that are protected by DRM (Digital Rights Management). • The track display for MP3/WMA data playback is the file numbers recorded on the disc. • The playback time may not be correctly displayed when a VBR (Variable Bit Rate) recorded file is played back. MP3/WMA Play Display The folder number and file number will be displayed as described below. 003-002 Folder number File number display display • Press VIEW to switch the display. See "Displaying the Text" for information about display switching. Repeat Play Press 6(RPT) to repeatedly play back the current track. The " RPT" indicator lights up, and the track (file) will be played repeatedly. Press 6(RPT) again to cancel. Folder Repeat Play (MP3/WMA) Press and hold 6(RPT) for at least 2 seconds. The " FOLDER" and " RPT" indicators appear in the display, and only files in the current folder are repeatedly played back. Press and hold 6(RPT) again to cancel. 6 M.I.X. (Random Play) Press 4(M.I.X.) in the play mode. The " M.I.X." indicator lights up, and the tracks (files) on the disc will be played back in random sequence. Press 4(M.I.X.) again to cancel. Folder M.I.X. (Random Play) (MP3/ WMA) Press and hold 4(M.I.X.) for at least 2 seconds. The " FOLDER" and " M.I.X." indicators appear in the display, and all files in the current folder are played back in random sequence. Press and hold 4(M.I.X.) again to cancel. Scanning Programs Press 5(SCAN) to activate the scan mode. The first 10 seconds of each track (file) will be played back in succession. Press 5(SCAN) again to cancel. Folder Scanning Programs (MP3/WMA) Press and hold 5(SCAN) for at least 2 seconds. From the next folder, the first 10 seconds of the first file in each folder is played back in sequence. Press and hold 5(SCAN) again to cancel. About MP3/WMA CAUTION Except for private use, duplicating audio data (including MP3/WMA data) or distributing, transferring, or copying it, whether for free or for a fee, without permission of the copyright holder is strictly prohibited by the Copyright Act and by international treaty. What is MP3? MP3, whose official name is "MPEG-1 Audio Layer 3," is a compression standard prescribed by the ISO, the International Standardization Organization and MPEG which is a joint activity institution of the IEC. MP3 files contain compressed audio data. MP3 encoding is capable of compressing audio data at extremely high ratios, reducing the size of music files to as much as one-tenth their original size. This is achieved while still maintaining near CD quality. The MP3 format realises such high compression ratios by eliminating the sounds that are either inaudible to the human ear or masked by other sounds. What is WMA? WMA, or "Windows Media™ Audio," is compressed audio data. WMA is similar to MP3 audio data and can achieve CD quality sound with small file sizes. Method for creating MP3/WMA files Audio data is compressed using software with MP3/WMA codecs. For details on creating MP3/WMA files, refer to the user's manual for that software. MP3/WMA files that are playable on this device have the file extensions "mp3" / "wma" Files with no extension cannot be played back (WMA ver. 7-9 are supported). Protected files are not supported. 7 On handling Compact Discs (CD/CD-R/CD-RW) • Do not touch the surface. • Do not expose the disc to direct sunlight. • Do not affix stickers or labels. • Clean the disc when it is dusty. • Make sure that there are no bumps around the disc. • Do not use commercially available disc accessories. Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight. Heat and humidity may damage the CD and you may not be able to play it again. To customers using CD-R/CD-RW • If a CD-R/CD-RW cannot be played back, make sure the last recording session was closed (finalized). • Finalize the CD-R/CD-RW if necessary, and attempt playback again. About media that can be played Use only compact discs with the label side showing the CD logo marks below. If you use unspecified compact di scs, correct performance cannot be guaranteed. You can play CD-Rs (CD-Recordables)/CD-RWs (CDReWritables) which have been recorded only on audio devices. You can also play CD-Rs/CD-RWs containing MP3/WMA formatted audio files. • Some of the following CDs may not play on this unit: Flawed CDs, CDs with fingerprints, CDs exposed to extreme temperatures or sunlight (e.g., left in the car or this unit), CDs recorded under unstable conditions, CDs on which a recording failed or a re-recording was attempted, copy-protected CDs which do not conform to the audio CD industry standard. • Use discs with MP3/WMA files written in a format compatible with this unit. For details, see "About MP3/WMA". • ROM data other than audio files contained in a disc will not produce sound when played back. Protecting the USB connection terminal • Only a USB memory can be connected to the USB connection terminal on this unit. Correct performance using other USB products cannot be guaranteed. A USB hub is not supported. • Do not connect a USB memory over 20 mm wide. Also, avoid connecting USB memory and Front Aux at the same time. • If a USB device is inserted in the unit, it projects out and may be a danger while driving. Use a commercially available USB standard extension cable, and connect it in a safe way. • Depending on the connected USB memory device, the unit may not function or some functions may not be performed. • The audio file format that can be played back on the unit is MP3/WMA. • Artist/song name, etc., can be displayed, however characters may not be correctly displayed. CAUTION Alpine accepts no responsibility for lost data, etc., even if data, etc. is lost while using this product. On Handling USB Memory • To prevent malfunction or damage, note the following points. Read the USB memory Owner's Manual thoroughly. Do not touch the terminals by hand or metal. Do not subject USB memory to excessive shock. Do not bend, drop, disassemble, modify or soak in the water. • Avoid usage or storage in the following locations: Anywhere in the car exposed to direct sunlight or high temperatures. Anywhere the possibility of high humidity or corrosive substances are present. • Fix the USB memory in a location where driver operation will not be hindered. • USB memory may not function correctly at high or low temperature • The USB flash memory supports a maximum of 4 GB per partition. The unit recognizes only one partition. • Use only certified USB memory. Note that even certified USB memory, may not function correctly depending on its type or state. • USB memory function is not guaranteed. Use USB memory according to the terms of agreement. • Depending on the settings of the USB memory type, memory state or encoding software, the unit may not play back or display properly. • A file that is copy-protected (copyright protection) cannot be played back. • USB memory may take time to start playback. If there is a particular file other than audio in the USB memory, it may take considerable time before the file is played back or searched. • The unit can play back "mp3", "wma" or "m4a" file extensions. • Do not add the above extensions to a file other than audio data. This non-audio data will not be recognised. The resulting playback may contain noise that can damage speakers and/or amplifiers. • It is recommended to back up important data on a personal computer. • Do not remove the USB device while playback is in progress. Change SOURCE to something other than USB, then remove the USB device to prevent possible damage to its memory. • Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. • "MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson." • "Supply of this product only conveys a license for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenuegeneration) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. An independent license for such use is required. For details, please visit http://www. mp3licensing.com" 3 Getting Started SOURCE/ Rotary encoder Attaching 1 Insert the left side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit. 2 Push the right side of the front panel until it locks firmly into the main unit. VIEW Accessory List • Head unit 1 • Power cable 1 • Mounting sleeve 1 • Carrying case 1 • Bracket key 2 • Rubber Cap 1 • Bolt Stud 1 • Owner's Manual 1 set Turning Power On and Off Press SOURCE/ to turn on the unit. • The first time power is turned on, the volume will start from level 18. Press and hold SOURCE/ for at least 2 seconds to turn off the unit. Detaching and Attaching the Front Panel Detaching 1 Turn off the unit power. 2 Press (Release) at the upper right side until the front panel pops out. 3 Grasp the right side of the front panel and pull it out. • Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit. • Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake. Adjusting Volume Turn the Rotary encoder until the desired sound is obtained. Adjusting Volume : 0 ~ 40 Setting Time 1 Press and hold VIEW for at least 2 seconds. The hour indication will blink. 2 Press or to adjust the hours while the time indication is blinking. 3 When the hour has been adjusted, press VIEW. The Minute indication will blink. 4 Press or to adjust the minutes while the time indication is blinking. 5 When the minute has been adjusted, press VIEW. The setting time mode is completed. • Hold down or to change numbers rapidly. Controllable with Remote Control This unit can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer. Point the optional remote control transmitter at the remote-control sensor. • The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction. • To protect the front panel, place it in the supplied carrying case. • When detaching the front panel, do not apply excessive force as it may result in malfunction. 4 Remote control sensor Radio SOURCE/ BAND/ / A.ME Preset buttons (1 through 6) Listening to Radio 1 Press SOURCE/ to select RADIO mode. 2 Press BAND/ / repeatedly until the desired radio band is displayed. FM1 FM2 FM3 AM FM1 3 Press or Press and hold or station. to tune in the desired station. for at least 0.5 seconds to seek Presetting Stations Automatically 1 Press BAND/ / repeatedly until the desired radio band is displayed. 2 Press and hold A.ME for at least 2 seconds. The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into preset buttons 1 to 6 in order of signal strength. • If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. Tuning to Preset Stations 1 Press BAND/ / repeatedly until the desired band is displayed. 2 Press any one of the station preset buttons (1 through 6) that has your desired radio station in memory. The display shows the band, preset number and frequency of the station selected. Presetting Stations Manually 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory. 2 Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the station. The selected station is stored. The display shows the band, preset number and station frequency memorized. • A total of 24 stations can be stored in the preset memory (6 stations for each band; FM1, FM2, FM3 and AM). • If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station. 5 Supported playback sampling rates and bit rates MP3 Sampling rates: Bit rates 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz, 12 kHz, 11.025 kHz, 8 kHz 8 - 320 kbps WMA Sampling rates: Bit rates: 48 kHz, 44.1 kHz, 32 kHz 64 - 160 kbps This device may not play back correctly depending on sampling rates. ID3 tags/WMA tags This device supports ID3 tag and WMA tag. If tag data is in an MP3/WMA file, this device can display the title (track title), artist name, and album name ID3 tag/WMA tag data. This device can only display up to 64 characters. (Unicoded file and folder names are up to 32 characters.) For non-supported characters and symbols an asterisk is displayed. If information contains characters other than ID3 tag information, the audio file may not be played back. The tag information may not be correctly displayed, depending on the contents. Producing MP3/WMA discs MP3/WMA files are prepared, then written to a CD-R or CD-RW using CD-R writing software. A disc can hold up to 255 files/folders (including Root Folders), and the maximum number of folders is 255. Playback may not be performed if a disc exceeds the limitations described above. Media supported The media that this device can play back are CD-ROMs, CD-Rs, and CD-RWs. Corresponding File Systems This device supports discs formatted with ISO9660 Level 1 or Level 2. Under the ISO9660 standard, there are some restrictions to remember. The maximum nested folder depth is 8 (including the root directory). The number of characters for a folder/file name is limited. Valid characters for folder/file names are letters A-Z, a-z, numbers 0-9 and symbols. This device also can play back discs in Joliet, Romeo, etc., and other standards that conform to ISO9660. However, sometimes the file names, folder names, etc., are not displayed correctly. Formats supported This device supports Multi-Session. This device cannot correctly play back discs recorded with Track At Once or packet writing. Apple HFS, UDF 1.50, Mixed Mode CD and Enhanced CD (CDExtra) are not supported. Order of files Files are played back in the order that the writing software writes them to the disc. Therefore, the playback order may not be what is expected. Verify the writing order in the software's documentation. The playback order of the folders and files is as follows. Root folder Folder MP3/WMA File * The folder No./ folder Name will not be displayed if no file is contained in the folder. Terminology Bit rate This is the "sound" compression rate specified for encoding. The higher the bit rate, the higher the sound quality, but also the larger the files. Sampling rate This value shows how many times per second the data is sampled (recorded). For example, music CDs use a sampling rate of 44.1 kHz, so the sound is sampled (recorded) 44,100 times per second. The higher the sampling rate, the higher the sound quality, but also the larger the volume of data. Encoding Converting music CDs, WAVE (AIFF) files, and other sound files into the specified audio compression format. Tag Song information such as track titles, artist names, album names, etc., written into MP3/WMA files. Root folder The root folder (or root directory) is found at the top of the file system. The root folder contains all folders and files. It is created automatically for all burned discs. 8 Sound Setting Rotary encoder (AUDIO) SOUND Adjusting Bass Level/Treble Level/ Balance (Between Left and Right)/Fader (Between Front and Rear) 1 Press Rotary encoder (AUDIO) repeatedly to choose the desired mode. Each press changes the mode as follows: BASS mode TREBLE BALANCE FADER Return to normal Bass: -12 ~ +12dB Treble: -12 ~ +12dB Balance : L15 ~ R15 Fader : R15 ~ F15 • If no operation is performed for 5 seconds after selecting the BASS, TREBLE, BALANCE or FADER mode, the unit automatically returns to normal mode. 2 Turn the Rotary encoder until the desired sound is obtained in each mode. Equalizer Presets (Factory's EQ) 6 typical equalizer settings are preset at the factory for a variety of musical source material. Press SOUND repeatedly until the desired Factory's EQ type is displayed. With each press of the button, the equalizer mode will display the selected equalizer characteristic. FLAT(OFF) ROCK POP JAZZ VOCAL CLUB FLAT(OFF) 9 Other Functions SOURCE/ Displaying Time Press VIEW repeatedly until the time is displayed. Each press changes the display. For details, see "Displaying the Text". • Selecting any radio or CD function while in the clock priority mode will interrupt the time display momentarily. The function selected will be displayed for about 5 seconds before the time returns to the display. VIEW 3(SCROLL) Note * CDE-110UB does not support WMA. Displaying the Text Text information, such as the disc name and the track name, will be displayed if playing a CD text compatible disc. It is also possible to display the folder name, the file name and the tag, etc., while playing MP3/WMA files. Press VIEW. The display will change every time the button is pressed. • To scroll text, press 3(SCROLL). The display in Radio mode: FREQUENCY CLOCK FREQUENCY The display in CD mode: TRACK NO./ELAPSED TIME TEXT (DISC NAME) * 1 TEXT (TRACK NAME) * 1 CLOCK TRACK NO./ELAPSED TIME The display in MP3/WMA mode: FOLDER NO./FILE NO. ELAPSED TIME FOLDER NAME FILE NAME ALBUM NAME * 2 SONG NAME * 2/ARTIST NAME * 2 CLOCK FOLDER NO./FILE NO. The display in AUX mode: AUX IN CLOCK AUX IN * 1 Displayed during playback of a disc with CD text. * 2 ID3 tag/WMA tag If an MP3/WMA file contains ID3 tag/WMA tag information, the ID3 tag/WMA tag information is displayed (e.g., song name, artist name, and album name). All other tag data is ignored. About "Text" Text: Text compatible CDs contain text information such as the disc name and track name. Such text information is referred to as "text." • Some characters may not be displayed correctly with this device, depending on the character type. • "NO TEXT" is displayed if text information cannot be displayed on this unit. • The text or tag information may not be correctly displayed, depending on the contents. Using the Front AUX Input Terminal Connect a portable music player, etc. by simply connecting it to the input on the front panel. An optional adapter cable is required (standard RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug). Press SOURCE/ , and select the AUX mode to listen to the portable device. RADIO CD * 1 USB * 2 AUX RADIO * 1 Displayed only when a disc has been inserted. * 2 Displayed only when USB memory is connected. Portable player, etc. Main unit or Optional adapter cable (RCA pin plugs [red, white] 3.5ø miniplugs) or (3.5ø miniplugs) 10