Alpine CDE-124SXM2 Owner's Manual (english) - Page 38
Specifications - stereo
View all Alpine CDE-124SXM2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Specifications FM TUNER SECTION Tuning Range Mono Usable Sensitivity 50 dB Quieting Sensitivity Alternate Channel Selectivity Signal-to-Noise Ratio Stereo Separation Capture Ratio 87.7~107.9 MHz 9.3 dBf (0.8 μV/75 ohms) 13.5 dBf (1.3 μV/75 ohms) 80 dB 65 dB 35 dB 2.0 dB AM TUNER SECTION Tuning Range Sensitivity (IEC Standard) 530-1,710 kHz 22.5 μV/27 dB CD PLAYER SECTION Frequency Response Wow & Flutter (% WRMS) Total Harmonic Distortion Dynamic Range Signal-to-Noise Ratio Channel Separation 5~20,000 Hz (±1 dB) Below measurable limits 0.008% (at 1 kHz) 95 dB (at 1 kHz) 105 dB 85 dB (at 1 kHz) USB SECTION USB requirements Max. Power Consumption USB Class File System MP3 Decoding WMA Decoding AAC Decoding Number of Channels Frequency Response* Total Harmonic Distortion Dynamic Range Signal-to-Noise Ratio Channel Separation USB 1.1/2.0 500 mA Mass Storage FAT 12/16/32 MPEG-1/2 AUDIO Layer-3 Windows Media™ Audio AAC-LC format ".m4a" file 2-Channel (Stereo) 5~20,000 Hz (±1 dB) 0.008% (at 1 kHz) 95 dB (at 1 kHz) 105 dB 85 dB (at 1 kHz) * Frequency response may differ depending on the encoder software/bit rate. PICKUP Wave length Laser power 795 nm CLASS I GENERAL Power Requirement Power Output Maximum Pre-Output Voltage CDE-123 CDE-124SXM/CDE-122 Bass Mid Treble Weight 14.4 V DC (11~16 V allowable) 18 W RMS × 4* 4 V/10 k ohms 2 V/10 k ohms ±14 dB at 100 Hz ±14 dB at 1 kHz ±14 dB at 10 kHz 1.6 kg (3 lbs. 8 oz) * Primary amplifier ratings per CEA-2006 Standard • Power output: measured at 4 Ohms and ≤ 1% THD+N • S/N: 80 dBA (reference: 1 W into 4 Ohms) CHASSIS SIZE Width Height Depth 178 mm (7") 50 mm (2") 161 mm (6~3/8") NOSEPIECE SIZE Width Height Depth 170 mm (6~3/4") 46 mm (1~13/16") 25 mm (1") Note • Due to continuous product improvement, specifications and design are subject to change without notice. 38-EN