Alpine CDE-135BT Owners Manual - Page 26

Phone book alphabet search function You can select the first three letters to search for a desired name in phone book list by using the Phone book alphabet search function. For example: Searching a name "Michael James" The following example explains how the search is performed. Depending on the setting in PB ORDER (refer to "Changing the Phone book List Order" on page 23), the phone book is listed in first name or last name order. Please search for the first name or last name according to the setting. 1 Press ABC SKIP while in the phone book list, the phone book alphabet search mode is activated. The letter selection list is displayed. 2 Turn the Rotary encoder to select the first letter (e.g. M), and then press . The letter selection list is displayed. 3 Turn the Rotary encoder to select the second letter (e.g. I), and then press . The letter selection list is displayed. 4 Turn the Rotary encoder to select the third letter (e.g. C), and then press ENTER. The names stored in phone book which begin with "MIC" are searched. 5 Turn the Rotary encoder to select the desired name (e.g. Michael James), and then press ENTER to make the call. Notes • This function is applied for letters A-Z. • If the selected name has several numbers registered in phone book, you need to turn the Rotary encoder to select the desired number, and then press ENTER. • Press  in step 3 or 4 to delete the current entry and return to the previous step. • You can search for a name by its first letter, first two letters or first three letters. Press ENTER after entering the desired number of letters. A list displays the names beginning with the entered letter(s). Call waiting function If a second call is received during a current call, you can have the first caller wait momentarily while you take the second call. When you are finished with one call, you can switch to the other one. If a second call is received during the current call (call1), the information of second caller (call2) is displayed instead of the current caller's name. Press  2, the call waiting mode is activated. In this case, call1 is on hold, while you take call2. Notes • In the call waiting mode, press 1  or  2 to switch between the current call and the person on hold. • In the call waiting mode, press and hold 1  or  2 for at least 2 seconds to hang up call1 or call2, and the other call will be answered automatically. • In the call waiting mode, you can press VIEW k to change the display between waiting number (1 or 2) and caller name. Preset a number in the Phone Book (Shortcut dial) Assign numbers that you dial frequently to presets for quick recall. You can assign up to six frequently called phone numbers to number presets. Select a number you want to preset from the Phone Book. Press and hold for at least 2 seconds any one of the preset buttons (1 through 6) into which you wish to store the number. The phone number you selected is stored in the selected preset. Notes • If the name has several numbers registered in the phone book, press ENTER after selecting the name. Turn the Rotary encoder to choose the desired number. Press and hold any one of the preset buttons (1 through 6) for at least 2 seconds. The selected number is stored as a preset number. • A total of 18 phone numbers can be stored in the preset memory (6 numbers for each mobile phone in the paired device list.) If a mobile phone is deleted from the paired device list, the stored preset numbers of this mobile phone are deleted, even when it is paired again. • If you store a phone number in a preset with a previously stored number, the current number will be cleared and replaced by the new one. Dialing the preset number 1 Press any one of the preset buttons (1 through 6) that has had a number stored in the phone mode. The information (name/number) stored in the preset station is displayed. 2 Press ENTER or f. The stored preset number is dialed directly. Adjusting the volume when receiving a Call While calling, you can adjust the volume. Turn the Rotary encoder to adjust the volume. Note • You may need to increase volume from your regular audio listening source level. However, increasing the volume excessively may result in feedback. Feedback is directly related to the volume. Turning down the volume as low as acceptable, will reduce it. Positioning the microphone in a direction away from the main car speakers (e.g. clipped on sun visor) may also reduce feedback at high volume. Muting the microphone input quickly (Voice Mute) While calling, activating the Voice Mute function will instantly mute the microphone input. Your voice will not be heard by the caller. While calling, press  to mute the microphone input. Press  again will bring the microphone input back to its previous volume level. Note • The operation can also be performed in the option menu of phone mode (calling mode). Refer to "Option Menu Setting" on page 18. 26-EN