Alpine CDE-164BT Owner's Manual (english) - Page 32
Setting the Auto Pairing with iPod/iPhone, Setting the Bluetooth Device, Setting the Visible Mode,
View all Alpine CDE-164BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Note • When BT IN is set to OFF, the indicators related to Hands-free phone (C battery charge and i signal strength) will not be displayed. Setting the Auto Pairing with iPod/iPhone By setting this item to ON, the unit will auto pair when an iPod/iPhone is connected to this unit via the USB port. Setting item: USB PAIR Setting contents: OFF / ON (Initial setting) OFF: Turn off the auto pair function. ON: Auto pair when an iPod/iPhone is connected to this unit via the USB port. Note • USB Auto-Pairing cannot take place if either device has been paired previously. Make sure the device name of both has been deleted from each device. Setting the Bluetooth Device Select one of 5 connected Bluetooth compatible devices that you previously registered. Setting item: PAIRED DEV 1 Turn the Rotary encoder to select a Bluetooth compatible device you want to use (you want to change connection), and then press ENTER. 2 Turn the Rotary encoder to select "CONNECT" to connect the selected device. The connected device is marked with "l". Select "DISCONNECT" to disconnect this device. Select "CLEAR" when you want to clear the device from the device list. Notes • If the connection is successfully changed, "CONNECTED" is displayed for 2 seconds and the indicator lights up, then the display returns to the SETUP screen. • If a Smartphone is connected to this unit successfully, the C indicator lights up to show the battery charge of the connected Smartphone. The X indicator lights up when the battery charge is about 50%, the Z indicator lights up when the battery charge is not enough, and it blinks as a low level warning. The Z indicator goes out when the battery is drained. At this time, the Bluetooth function is unavailable due to the Smartphone powered off. • Indicator i (Signal Strength): The indicator will display the current signal strength of your service provider. The I indicator blinks when the signal of the connected Smartphone is very weak. The I indicator goes out when the Smartphone is not in service area or receives no signal. • Depending on the connected Smartphone, the C (battery charge), and i (signal strength) indicators may not be displayed. • A total of 5 devices can be registered. If a 6th device is registered, the earliest registered device will be deleted automatically. Setting the Visible Mode You can set whether this unit can be recognized or not from a Bluetooth compatible device. Normally set this to ON. Setting item: VISIBLE M Setting contents: OFF / ON (Initial setting) OFF: Disable recognition of this unit from the Bluetooth compatible device. ON: Enable recognition of this unit from the Bluetooth compatible device. Setting the Bluetooth sound quality Change these settings to improve the quality of the outgoing or incoming call. Setting item: CALL SOUND Further setting items: SOURCE VOL / TYPE SET Adjusting the volume (SOURCE VOL) You can emphasize or weaken the volume level of the Phone call, the ring tone and the microphone input to fit your own preferences. Setting contents: PHONE TALK: −5 dB ~ +5 dB RING TONE: −5 dB ~ +5 dB MIC GAIN: −5 dB ~ +5 dB Note • The initial setting of PHONE TALK / RING TONE / MIC GAIN is 0. Sound Auto setting (TYPE SET) Depending on your calling environment, choose one of the settings below which gives the best sound quality. Setting contents: TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4 / TYPE5 TYPE1: Standard Mode (recommended) TYPE2: Enhances the noise reduction TYPE3: Enhances the echo-cancel TYPE4: Enhances both noise reduction and echo-cancel TYPE5: Weakens both noise reduction and echo-cancel Note • The functions below are designed to improve the sound quality of the outgoing call. Noise reduction: This function can reduce the road noise, but excessive enhancement may affect the sound quality of the call. Echo-cancel: This function can reduce the echo, but excessive enhancement may affect the sound quality of the call. 32-EN