Alpine CDE-HD149BT User Manual - Page 29

BT Hands Free Calling / VOICE CTRL. Rotary encoder /ENTER  VIEW / II 1 SOURCE 2 AUDIO/SETUP BAND/ ABC SEARCH Preset buttons (1 through 6) Setup Before Using About BLUETOOTH BLUETOOTH is a wireless technology allowing communication between a mobile device or personal computer over short distances. This enables a hands-free call or data transmission between BLUETOOTH compatible devices. BLUETOOTH transmission is available in the unlicensed 2.4 GHz spectrum if the distance between devices is within 10 meters. For details, refer to the BLUETOOTH Home page (http://www.bluetooth.com). Notes • Depending on the BLUETOOTH version, a BLUETOOTH compatible device may not be able to communicate with this unit. • Proper function of this unit with all BLUETOOTH compatible devices is not guaranteed. For handling of the BT compatible device, consult your ALPINE dealer or ALPINE website. • Depending on the surroundings, BLUETOOTH wireless connection may be unstable. • When you place a call, or perform setup operations, be sure to stop your car in a safe place. • Depending on the connected BLUETOOTH compatible device(s), the function may differ. Also refer to the Owner's Manual of the connected device(s). • When you search for this unit using the BLUETOOTH compatible phone, the unit name is displayed as "Alpine CD Receiver". Before Using BLUETOOTH Function Before using the BLUETOOTH function, the following settings need to be made. Set "Bluetooth IN" to ON when you want to use Hands-Free phone or Bluetooth Audio function. Refer to "Setting the BLUETOOTH Connection (Bluetooth IN)" on page 30. Note • Before using BLUETOOTH function, it must be paired with this unit. Refer to "How to connect to a BLUETOOTH compatible device (Pairing)" on page 29. How to connect to a BLUETOOTH compatible device (Pairing) For details on the control from a BLUETOOTH compatible device, refer to the Owner's Manual of the BLUETOOTH compatible device. Pairing a BLUETOOTH compatible device with SSP (Secure Simple Pairing) 1 Using your BLUETOOTH compatible device, select the "Alpine CD Receiver" for pairing. 2 Turn the Rotary encoder to change the head unit display from "Pairing NO" to "Pairing YES", and then press ENTER. If "Pairing NO" is selected, the connection will be canceled. 3 If the pairing was successful, "Connected" is displayed for a few seconds. The head unit then returns to its previous state. Pairing a BLUETOOTH compatible device without SSP (Secure Simple Pairing) 1 Using your BLUETOOTH compatible device, select the "Alpine CD Receiver" for pairing. 2 Input the passcode ("0000") in a BLUETOOTH compatible device. Note • The passcode is fixed as "0000". 3 If the pairing was successful, "Connected" is displayed for a few seconds. The head unit then returns to its previous state. Notes • If the connection is unsuccessful, "Failed" is displayed. • After a successful pairing, the two devices should reconnect automatically whenever the vehicle's ignition is turned ON. If the auto connection fails, try to reconnect manually. • Set "Visible Mode" to ON to enable this unit to be recognized by a BLUETOOTH compatible device, refer to "Setting the Visible Mode" on page 30. • You can also manually pair the BLUETOOTH devices from this unit. For details, refer to "Pairing a BLUETOOTH Device from the unit" on page 30. 29-EN