Alpine HCE-C117D Owners Manual - Page 4

About Camera Installation Location

Get Alpine HCE-C117D PDF manuals and user guides View all Alpine HCE-C117D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

• Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle's electrical system. • When making connections to the vehicle's electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the HCE-Cll7D to the fuse box, make sure the fuse for the intended circuit of the HCE-Cll7D has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your Alpine dealer. • About Rear Camera The rear camera of this camera system is a dedicated product. Do not connect it to other cameras. • About Power Connection Connect a reverse input cable (orange/white) to the power cable of the rear lamp. For details, consult a dealer purchased camera, or car dealer. Connect this to a power cable of the rear lamp, but not to the positive of the rear lamp signal cable. • Do not use mobile phones and wireless devices near the camera. • Doing so may result in noise on the screen or malfunction. It is recommended to use mobile phones or wireless devices away from the camera. • About Camera Installation Location Before installing, make sure there is a enough space to be able to install the camera. If possible, install the camera in the center of the bumper or other fitting. If the camera is installed at a distance left or right of center, the image may differ from the real view. • Confirming the Display Function To connect the unit, confirm that the monitor will require a compatible RCA pin jack.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
•
Be
sure to connect the color coded leads according to the
diagram. Incorrect connections may cause the unit to
malfunction
or
damage to the vehicle's electrical system.
•
When making connections to the vehicle's electrical system,
be aware
of
the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for this
unit. When connecting the
HCE-Cll7D
to the fuse box, make
sure the fuse for the intended circuit
of
the
HCE-Cll7D
has the
appropriate amperage. Failure to do so may result in damage to
the unit and/ or the vehicle. When in doubt, consult your Alpine
dealer.
•
About Rear Camera
The rear camera
of
this camera system
is
a dedicated product.
Do not connect it to other cameras.
•
About Power Connection
Connect a reverse input cable (orange/white) to the power cable
of
the rear lamp. For details, consult a dealer purchased camera,
or car dealer. Connect this to a power cable
of
the rear lamp, but
not to the positive
of
the rear lamp signal cable.
•
Do
not
use mobile phones and wireless devices near the
camera.
•
Doing so may result in noise on the screen
or
malfunction. It
is
recommended to use mobile phones
or
wireless devices away
from the camera.
•
About Camera Installation Location
Before installing, make sure there
is
a enough space to be able
to install the camera. If possible, install the camera in the center
of
the bumper or other fitting. If the camera
is
installed at a
distance left or right
of
center, the image may differ from the
real
view.
•
Confirming the Display Function
To
connect the unit, confirm that the monitor will require a
compatible
RCA
pin jack.