Alpine HDA-V90 Owners Manual - Page 5
Installation, Removing The Top, Cover
View all Alpine HDA-V90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
und to ing s in pment y, and it ordance nit in e is anty, which d States r dealer ge. 4 2 8 1 1 2 3 ......1 SET INSTALLATION REMOVING THE TOP Due to the high power output of the HDA-M80/ COVER HDA-F60/HDA-V90 considerable heat is produced when the amplifier is in operation. For this reason, To use the top inner panel, remove the top cover. the amplifier should be mounted in a location which will allow for free circulation of air, such as Hexagon wrench (included) inside the trunk. For alternate installation locations, please contact your authorized Alpine dealer. Top cover EN 1. Attach the mounting legs to the bottom of the amplifier with 8 screws. DE Mounting legs (×2) (included) Screws (×8) (included) FR ES (e.g. HDA-V90) 2. Make sure there are no objects behind the surface that may become damaged during drilling. 3. Drill the screw holes. 4. Position the HDA-M80/HDA-F60/HDA-V90 over the screw holes, and secure with 4 self-tapping screws. Self-Tapping Screws (×4) (included) (e.g. HDA-V90) IT SE RU CS Holes (×4) (e.g. HDA-V90) 3-EN ALPINE HDA-M80/HDA-F60/HDA-V90 68-44781Z25-A (EN/DE/FR/ES/IT/SE/RU/CS)