Alpine HDP-D90 HDP-D90 Owners Manual - Page 11

⑦ Function page selection. ⑧ Editing area of function page Connection and Temperature Display Setting items: Connection and temperature display Setting content: Connection/disconnected/temperature display Connection Settings 1 Connect the USB cable and open the software, it will automatically go online. After the connection is successful, the connection icon will show green [ ]。 2 After online, click the connection icon to disconnect. When not online, the connection icon will display red [ ], and click the connection icon again to go online again. Temperature Display Detect the temperature on the surface of the machine and display the current temperature value. computer can be loaded as the current machine working scene. Save as PC Preset The current machine work scene file can be saved to the computer for later recall. Load All Presets Load the files of the entire machine previously saved on the computer to the machine (including the current working scene, machine preset scene, output channel configuration data, etc.), and copy all the machine data that has been debugged to the currently connected machine. Save All Presets Save all data on the current online machine as a computer file (including the current working scene, machine preset scene, output channel configuration data, etc.) for later recall when the whole machine is copied. Option Setting Click [Option] to enter the setting page.  Setting page File Settings Click [File] to enter the loading or saving scene file page.  Load or save presets file page Setting items:File Setting content:Load PC Preset/Save as PC Preset/Load All Presets/Save All Presets Load PC Preset The scene file previously saved on the 9 EN Signal generator Signal selection Volume Sine wave frequency Output signal selection Input link settings Output link settings Built-in AMP Firmware update