Alpine IVA-W203 Owners Manual - Page 51

Navigation System (Optional) Portable Navigation System Operation (Optional) An optional Alpine Portable Navigation System is controllable from the unit. For details on operation, refer to the Owner's Manual of the Portable Navigation. If the Built-in Dock is used: About dockable Portable Navigation devices with this unit. • Docking to the PMD-B100 is not possible. • The IVA-W203 can be connected by docking with the PMD-B200 or NVE-P1. 1 Press on the unit. The unit changes to the EJECT/TILT screen. 2 Touch [OPEN]. The movable monitor will open. 3 Remove the slot panel, then insert the Portable Navigation device in the unit (See the illustration below). Portable Navigation Slot Removing the Portable Navigation Device 1 Press on the unit. The display changes to the EJECT/TILT screen. 2 Touch [OPEN] or [ ] of NAV. on the EJECT/TILT screen. The movable monitor will open. 3 Press [ ] behind the monitor. The Portable Navigation device is removed. Push Take care when removing the optional portable navigation system, as it may spring out strongly from the unit. Be careful with removing the Portable Navigation System While your vehicle is stopped, remove the navigation system by pressing the button with your hand in the slot of the unit, ensuring that the navigation system does not hit your finger. Optional Portable Navigation • The slot panel can be detached by placing a finger in the hole in the center of the panel and pulling it down. • If the face plate is attached, first remove the face plate, then the slot panel. After removing the slot panel, reattach the face plate. 4 After inserting, touch [CLOSE] on the EJECT/TILT screen. The movable monitor will close. 5 Press SOURCE. The SOURCE selection screen is displayed. 6 When the source name of [NAV.], on the SOURCE selection screen is displayed, touch the desired source name. • For details on operation, refer to the Owner's Manual of the Portable Navigation device. 49-EN