Alpine N872A Hardware Manual - Page 11

Main unit Power indicator DVD-ROM compartment door Eject button Press to eject the DVD-ROM. Inserting the DVD-ROM 1 Open the DVD-ROM compartment door. a Keep the door closed except when changing the DVD-ROM. a Before inserting or removing the DVDROM, always turn the ignition key to Tips ACC or ON. You cannot remove or insert the DVD-ROM with the ignition key turned OFF. a Do not insert any DVD Video discs or other non-Alpine DVD-ROMs. Removing the DVD-ROM 1 Open the door. Before Using This System If a DVD-ROM is already in the main unit, remove it by referring to "Removing the DVD-ROM" section. 2 Insert the DVD-ROM with the label side facing up. When you insert the DVD-ROM into a certain position, it is automatically pulled into the navigation system. Do not touch the surface of the Tips disc directly with your fingers. 2 Press the EJECT button. 3 When the DVD-ROM has been ejected part way, take it out. 3 Close the door. Be sure to close the door to prevent dust from getting inside. Do not close the door while the DVD-ROM is being ejected. If the eject button is pressed with the DVD-ROM ejected part way, Tips the DVD-ROM will be pulled into the system. 4 Close the door. a The DVD-ROM is a delicate device. Avoid dropping or Tips scratching it. a Keep the DVD-ROM away from dust and moisture. 11