Alpine PSS-21WRA Owners Manual - Page 11

WRANGLER Jeep Wrangler ˜ 11/19 Tweeter Installation 1 Connect the front (SPT-71C) tweeters to the factory harness and mount X-Over network using a cable tie as shown below. 2 Mount the front (SPT-71C) tweeters using the factory screws. Front Speaker Installation NOTE: Polyfill installation is critical to the sound quality of the system, please do not skip this step 1 Stuff the speaker enclosure with the supplied polyfill fiber. Separate the center creating an opening and pass the speaker cable through. 2 Connect and mount 6.5" speakers using the provided Truss-head Phillips screws. Sound Bar Speaker Installation NOTE: Polyfill installation is critical to the sound quality of the system, please do not skip this step 1 Stuff the speaker cavity with the supplied polyfill fiber. Separate the center creating an opening and pass the speaker cable through. 2 Connect and mount both rear (SPT-70C) tweeters and 6.5" Speaker adapters using the factory Torx screws. Mount the rear (SPT-70C) 6.5" speakers using the provided Truss-head Phillips screws.