Alpine PSU-300ACD Owners Manual - Page 7

Honda Accord ˜ 7/12 Installation 1 Connect the power cable to the Positive (+) battery terminal at the fuse block in the engine compartment. Note: The negative terminal should remain disconnected unit the installation is completed. 2 Route the cable towards the passenger side as shown below. 3 Route the power cable thru the rubber grommet on the firewall on the passenger side. 4 Remove the paint to expose bare metal near the seat's harness and attach the main harness Negative (-) ground terminal with the provided wafer head self tapping screw and lock washer. 5 Using a step drill, drill a ½" hole on the center console compartment and feed the subwoofer level remote cable thru. 6 Mount the subwoofer level remote on the center console compartment (as shown below) and route the cable to the passenger side seat.