Alpine PXE-C80-88 Owners Manual - Page 26

Mobile Phone App Overview This manual explains how to use the Alpine AutoEQ app on an iPhone to perform equalization. Here is an overview of the process: 1 Setup A list of required software and hardware. 2 Connect Connect the iPhone app to the Alpine amp. 3 Volume adjustment The app will assist you in setting the right volume for measurement. 4 Measurement You will move the iPhone throughout the cabin in a specific way while the amp plays frequency sweeps. This measures the sound in the cabin. 5 Tuning Once you have an accurate measurement, you can tune the system using the graphical interface. Setup This section covers the required hardware and software for using Alpine AutoEQ. 1 Hardware Necessary hardware includes: • Alpine amp • An iPhone with access to the App Store 2 Software The Alpine AutoEQ app is available from the App Store. Open the App Store and search for "PXE-C80_C60." Be sure to select the app published by Alpine Electronics. Connect Follow the instructions below to connect the Alpine AutoEQ app to the amp. 1 Turn on the amp Power on the Alpine amp. Make sure its Bluetooth dongle is plugged in. 2 Bluetooth Settings on iPhone From the iPhone's home screen, open the Settings app. Tap on Bluetooth to enter the Bluetooth settings. In the list of available devices, you will see the Alpine amp. It will have a name that starts with "DSP HD...". Tap on this option to connect your phone to the amp. 3 Open the app and connect From the iPhone's home screen, open the Alpine AutoEQ app. When the app opens, it will scan for Alpine amps. In the upper portion of the screen, it will show new amps you have not connected to. The Recently connected panel in the lower part of the screen shows amps you have connected to previously. Tap on the amp you want to connect to. Figure 1 24-EN