Alpine R-A60F Owners Manual English - Page 5
Accessories, Installation, Attaching The Logo, Plate
View all Alpine R-A60F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ACCESSORIES • Self-Tapping Screw (M4 × 14 4 • Mounting Bracket and Screws 4 SETS • Logo Plate 1 • Hexagon Wrench (Large/Small 1 SET The Logo Plate is temporarily affixed to the top cover. 5. Position the R-A75M/R-A60F over the screw holes, and secure with four self-tapping screws. Self-Tapping Screws M4 × 14 mm (× 4) (included) INSTALLATION Due to the high power output of the R-A75M/R-A60F considerable heat is produced when the amplifier is in operation. For this reason, the amplifier should be mounted in a location which will allow for free circulation of air, such as inside the trunk. For alternate installation locations, please contact your authorized Alpine dealer. 1. Attach the Mounting Brackets to the bottom of the amplifier with eight screws. Screws (× 8) (included) Mounting Bracket (included) Holes (× 4) (e.g. R-A60F) ATTACHING THE LOGO PLATE The Logo Plate is temporarily affixed to the top cover. 1. Peel the Logo Plate along with the backing sheet from the top cover. 2. Peel the backing sheet from the Logo Plate, then attach it to this unit in your desired direction. Backing Sheet Logo Plate 2. Using the amplifier as a template, mark the four screw locations. 3. Make sure there are no objects behind the surface that may become damaged during drilling. 4. Drill the screw holes. (e.g. R-A60F) 3-EN