Alpine S2-A36F Owners Manual - Page 18
About Connecting to the Speaker Input Level System, e.g. S2-A36F, Important Tips on Connection
![]() |
View all Alpine S2-A36F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
About Connecting to the Speaker Input Level System When connecting by using the Speaker-RCA Conversion Cable ( ) (sold separately), switch the Input Level and Turn-on Type Switch ( ) to "HI". e.g. S2-A36F Input Level and Turn-on Type Switch RCA Input Jacks [HI] Head Unit, etc. Front Speaker output lead (L) Front Speaker output lead (R) Rear Speaker output lead (R) Rear Speaker output lead (L) • Do not mistake the Speaker Output Lead on the head unit side connected to this unit. Front Speaker output (L)/(R) to CH1/CH2, Rear Speaker output (L)/(R) to CH3/CH4 • For the "Speaker Input Level System" setting, connecting the Remote Turn-On Lead is not required due to the "REMOTE SENSING" function of this product. However, the "REMOTE SENSING" function may not work depending on the signal source connected. In such a case, connect the Remote Turn-On Lead to an incoming power supply cord (accessory power) in the ACC position. Important Tips on Connection with Y-adapter Low output will result if only one channel input is used. The Y-adapter is required if Head Unit, etc. has only a one signal output. Proper connection Improper connection Head Unit, etc. One signal 16-EN Head Unit, etc. One signal
![](/manual_guide/products/alpine-s2a55v-owners-manual-9733c8b/18.png)