Alpine S2-A55V Owners Manual - Page 5

ACCESSORIES • Self-Tapping Screw 4 • Hexagon Wrench 1 INSTALLATION Due to the high power output of the S2-A36F/ S2-A55V considerable heat is produced when the amplifier is in operation. For this reason, the amplifier should be mounted in a location which will allow for free circulation of air, such as inside the trunk. For alternate installation locations, please contact your authorized Alpine dealer. 1. Using the amplifier as a template, mark the four screw locations. 2. Make sure there are no objects behind the surface that may become damaged during drilling. 3. Drill the screw holes. 4. Position the S2-A36F/S2-A55V over the screw holes, and secure with four self-tapping screws. Self-Tapping Screws (× 4) (included) ATTACHING THE TERMINAL COVERS Attach the terminal covers (included) after connections and confirmation of correct operation. Attaching the terminal covers will improve the appearance of the unit. How to attach the terminal covers: Attach the left and right terminal covers using the supplied Self-Tapping Screws (3×8), as shown in the figure below. Self-Tapping Screws (3×8) Terminal covers (left and right common) (e.g. S2-A36F) CAUTION Do not lift or carry the unit by the attached terminal covers. Holes (× 4) (e.g. S2-A36F) 3-EN