Alpine TME-M770S Owners Manual - Page 17

Installation Installing AV Interface Unit This Unit can be placed inside the trunk, on the kick panel of the front passenger's seat or underdash. However, to avoid unnecessary signal wiring, it is better to mount the Unit as close as possible to the Display. DO NOT MOUNT THE INTERFACE UNIT IN LOCATIONS EXPOSED TO MOISTURE OR EXTREME HEAT (such as the engine compartment). Velcro fastener Mounting: 1. Place a Velcro fastener onto the mounting surface. The rough side should be facing the unit. 2. Remove the backing to the adhesive on the Velcro strips. Press the unit onto the mounting location. Attaching with screws 1. Place the unit on the location chosen for installa- tion. 2. Mark the screw locations using the unit as a template. 3. Drill a hole less than 3 mm in diameter. WARNING When you are drilling a hole in the car body, be careful not to damage pipes, tanks or electrical wiring etc.. It might cause an accident or a fire. FR 4. Firmly attach the unit using 4 of the supplied selftapping screws (M4 x 14). VIDEO I AUX OUT L AUDIO R I DISPLY OUT I PHONE OUT VIDEO I AUX IN 2 L AUDIO R VIDEO I AUX IN 1 L AUDIO R I RGB IN I POWER SUPPLY TME-M770 TOUCH PANEL WIDE LCD MONITOR Self-tapping screws (M4 x 14) ES VIDEO I AUX OUT L AUDIO R I DISPLY OUT I PHONE OUT VIDEO I AUX IN 2 L AUDIO R VIDEO I AUX IN 1 L AUDIO R I RGB IN I POWER SUPPLY TOUCH PANEL WIDE LCD MONITOR TME-M770 DE Velcro fastener (included) IT SE 15-EN