Alpine X009-FD1 Installation Manual (english) - Page 7

Factory unit disassembly process

Get Alpine X009-FD1 PDF manuals and user guides View all Alpine X009-FD1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

FULL SIZE TRUCK Ford F-150 ˜ 7/12 Factory unit disassembly process 1 In the passenger side of the vehicle open the glove box and push the side tabs towards inside to release the glove box. Extract 3 X 8 mm (may also be 3 x 10 mm) bolts to release the airbag. 5 Remove cover below HVAC and extract 7 mm screw. 6 At the top of the radio bezel remove the rubber screw cover, extract 2 x 7 mm screws and remove the radio bezel. 2 Without disconnecting the Airbag push it out far enough to expose the copper plated 7 mm screw on the left side of the airbag and extract it. 7 Extract 4 x 7 mm screws from the factory radio and remove it. 3 Remove the instrument cluster panel by extracting 2 x 7 mm screws. 4 Remove both side vent covers by unclipping them using a panel remover tool.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
Ford F-150
FULL SIZE TRUCK
±
7/12
Factory unit disassembly process
1
In the passenger side of the vehicle open the glove
box and push the side tabs towards inside to
release the glove box. Extract 3 X 8 mm (may also
be 3 x 10 mm) bolts to release the airbag.
2
Without disconnecting the Airbag push it out far
enough to expose the copper plated 7 mm screw
on the left side of the airbag and extract it.
3
Remove the instrument cluster panel by extracting
2 x 7 mm screws.
4
Remove both side vent covers by unclipping them
using a panel remover tool.
5
Remove cover below HVAC and extract 7 mm
screw.
6
At the top of the radio bezel remove the rubber
screw cover, extract 2 x 7 mm screws and remove
the radio bezel.
7
Extract 4 x 7 mm screws from the factory radio and
remove it.