Alpine X109-WRA Kac-001 Installation Manual english - Page 2

Component Connector View SIDE VIEW POWER RESET HEADUNIT CAN 321 4321 4321 OUTPUT UPDATE 12 11 10 9 8 7 6 5 4 3 2 1 24 23 22 21 20 19 18 17 16 15 14 13 5/8 POWER (3-Pin White Connector) Pin # Color 1 BLACK Application Ground Lead 2 RED Ignition 3 YELLOW Battery Lead Detail Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened. Connect this lead to an open terminal on the vehicle's fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position. Connect a fused 12V DC lead to the positive (+) post of the vehicle battery. OUTPUT (24-Pin Blue Connector) Pin # Color 17 PURPLE Application Output 1 Detail (-) 250mA Accessory output 5 WHITE/RED Output 2 18 BROWN Output 3 6 BLUE Output 4 19 GREEN Output 5 7 PINK Output 6 (-) 250mA Accessory output (-) 250mA Accessory output (-) 250mA Accessory output (-) 250mA Accessory output (-) 250mA Accessory output 20 WHITE 8 GRAY Output 7 Output 8 (-) 250mA Accessory output (-) 250mA Accessory output Warning IMPROPER INSTALLATION MAY RESULT IN SERIOUS DAMAGE OR INJURY INCLUDING ELECTRICAL SHOCK, AND INTERFERENCE WITH THE OPERATION OF THE VEHICLE. 6/8 Connection ˜ This product has a maximum negative trigger output of 250mA. An automotive grade Bosch-style 12V relay may be necessary for higher current accessories. (Sold separately) ˜ ADS i-Datalink Maestro is required to operate this external accessory control module. ˜ For 3rd party controlled accessories, please refer to the corresponding installation manual. SIDE VIEW POWER RESET HEADUNIT CAN OUTPUT UPDATE Reset Button USB port (Firmware updates only) Power Harness (3-pin White) Interface Harness (4-pin White) Interface Cable (4-pin) [included with ADS module] 8ch Output Harness (24-pin White) BATT* (Yellow) ACC (Red) GND (Black) *Fuse Rating: 7A Connect to IDATALINK I/F ADS cable from Head Unit module (4-pin Black) iDatalink MAESTRO Module Output 1 (Purple) Output 2 (White/Red) Output 3 (Brown) Output 4 (Blue) Output 5 (Green) Output 6 (Pink) Output 7 (White) Output 8 (Gray) Connect to Relay/output to accessories (Sold separately) Warning IMPROPER INSTALLATION MAY RESULT IN SERIOUS DAMAGE OR INJURY INCLUDING ELECTRICAL SHOCK, AND INTERFERENCE WITH THE OPERATION OF THE VEHICLE. 7/8 System Diagram Relay Installation Accessory Control Module Output iDatalink MAESTRO Module OBD2 12V or GND (depending on the accessory) 12VDC Fused 87 86 87a 85 30 To Accessory Head Unit Setting In order to use this feature, the "External Accessory Control" setting must be turned on. Setup System External Accessories External Accessory Ctrl Please refer to the head unit's owner's manual for detailed operating instructions. Ext Acc Ctrl 8/8 R LIMITED WARRANTY ALPINE ELECTRONICS OF AMERICA, INC. ("Alpine"), is dedicated to quality craftsmanship and is pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed below. PRODUCTS COVERED: This Warranty covers Car Audio Accessories ("the product"). Products purchased in the Canada are covered only in the Canada. Products purchased in the U.S.A. are covered only in the U.S.A. LENGTH OF WARRANTY: This Warranty is in effect for one year from the date of the first consumer purchase. WHO IS COVERED: This Warranty only covers the original purchaser of the product, who must reside in the United States, Puerto Rico or Canada. WHAT IS COVERED: This Warranty covers defects in materials or workmanship (parts and labor) in the product. WHAT IS NOT COVERED: This Warranty does not cover the following: 1 Damage occurring during shipment of the product to Alpine for repair (claims must be presented to the carrier). 2 Damage caused by accident or abuse. 3 Damage caused by negligence, misuse, improper operation or failure to follow instructions contained in the Owner's manual. 4 Damage caused by act of God, including without limitation, earthquake, fire, flood, storms or other acts of nature. Any cost or expense related to the removal or reinstallation of the product. 5 Service performed by an unauthorized person, company or association. 6 Any product which has the serial number defaced, altered or removed. 7 Any product which has been adjusted, altered or modified without Alpine's consent. 8 Any product not distributed by Alpine within the United States, Puerto Rico or Canada. 9 Any product not purchased from an Authorized Alpine Dealer. HOW TO OBTAIN WARRANTY SERVICE: 1 You are responsible for delivery of the product to an Authorized Alpine Service Center or Alpine for repair and for payment of any initial shipping charges. Alpine will, at its option, repair or replace the product with a new or reconditioned product without charge. If the repairs are covered by the warranty, and if the product was shipped to an Authorized Alpine Service Center or Alpine, Alpine will pay the return shipping charges. 2 You should provide a detailed description of the problem(s) for which service is required. 3 You must supply proof of your purchase of the product. 4 You must package the product securely to avoid damage during shipment. To prevent lost packages it is recommended to use a carrier that provides a tracking service. HOW WE LIMIT IMPLIED WARRANTIES: ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR USE AND MERCHANTABILITY ARE LIMITED IN DURATION TO THE PERIOD OF THE EXPRESS WARRANTY SET FORTH ABOVE AND NO PERSON IS AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF THE PRODUCT. HOW WE EXCLUDE CERTAIN DAMAGES: ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES CAUSED BY THE PRODUCT. THE TERM "INCIDENTAL DAMAGES" REFERS TO EXPENSES OF TRANSPORTING THE PRODUCT TO THE ALPINE SERVICE CENTER, LOSS OF THE ORIGINAL PURCHASER'S TIME, LOSS OF THE USE OF THE PRODUCT, BUS FARES, CAR RENTALS OR OTHERS COSTS RELATING TO THE CARE AND CUSTODY OF THE PRODUCT. THE TERM "CONSEQUENTIAL DAMAGES" REFERS TO THE COST OF REPAIRING OR REPLACING OTHER PROPERTY WHICH IS DAMAGED WHEN THIS PRODUCT DOES NOT WORK PROPERLY. THE REMEDIES PROVIDED UNDER THIS WARRANTY ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS. HOW STATE/PROVINCIAL LAW RELATES TO THE WARRANTY: This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state and province to province. In addition, some states/ provinces do not allow limitations on how long an implied warranty lasts, and some do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, limitations as to these matters contained herein may not apply to you. IN CANADA ONLY: This Warranty is not valid unless your Alpine car audio product has been installed in your vehicle by an Authorized Installation Center, and this warranty stamped upon installation by the installation center. HOW TO CONTACT CUSTOMER SERVICE: Should the product require service, please call the following number for your nearest Authorized Alpine Service Center. CUSTOMER SERVICE 1-800-421-2284, ext. 860304 TECH SUPPORT 1-800-TECH-101 (1-800-832-4101) Or visit our website at; http://www.alpine-usa.com ALPINE ELECTRONICS OF AMERICA, INC., 19145 Gramercy Place, Torrance, California 90501, U.S.A. Do not send products to this address. Call the toll free telephone number or visit the website to locate a service center.