Amana ABB1921BRM Owners Manual - Page 9

Remove and Replace Freezer Drawer, Remove and Replace Drawer Handle, Remove Drawer Front, Replace

Get Amana ABB1921BRM PDF manuals and user guides View all Amana ABB1921BRM manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Remove and Replace Freezer Drawer IMPORTANT: ■■ Two people may be required to remove and replace the freezer drawer. ■■ All graphics are included later in this section after "Final Steps." Remove and Replace Drawer Handle Style 1 Handle ■■ Using a 3⁄32" or 1⁄8" hex key, loosen the two setscrews located on the side of each handle. Pull the handle straight out from the drawer. Make sure you keep the screws for reattaching the handles. See Style 1 Handle, graphic 2. ■■ To replace the handle, reverse the directions. Style 2 Handle ■■ To remove the handle, grasp the handle firmly, slide the handle to the left and pull the handle straight out from the drawer. See Style 2 Handle, graphic 2. ■■ To replace the handle, position the handle so that the large holes in the mounting clips are to the right and align the holes with the door studs. Rotate the handle so that the mounting clips are flat against the drawer and slide the handle to the right to engage. See Style 2 Handle, graphic 2. Remove Drawer Front 1. Open the freezer drawer to full extension. 2. Loosen the four screws attaching the drawer glides to the drawer front. See Drawer Front Removal graphic. NOTE: Loosen screws three to four turns. Keep the screws in the drawer front. 3. Lift drawer front upward and off the screws. See Drawer Front Removal graphic. Replace Drawer Front 1. Slide the drawer glides out of the freezer compartment. Insert the screws in the top of the drawer front into the slots in the drawer brackets. See Drawer Front Replacement graphic. 2. Pull the drawer brackets toward you to insert the two screws in the bottom of the drawer front into the brackets. See Drawer Front Replacement graphic. 3. Completely tighten the four screws. Final Steps 1. Check all holes to make sure that hole plugs and screws are in place. Reinstall top hinge cover as shown in Top Hinge graphic. WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 2. Plug into a grounded 3 prong outlet. 3. Return all removable door parts to door and food to refrigerator. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
9
Remove and Replace Freezer Drawer
IMPORTANT:
■
Two people may be required to remove and replace the
freezer drawer.
■
All graphics are included later in this section after “Final
Steps.”
Remove and Replace Drawer Handle
Style 1 Handle
■
Using a 3⁄32" or 1⁄8" hex key, loosen the two setscrews
located on the side of each handle. Pull the handle straight
out from the drawer. Make sure you keep the screws for
reattaching the handles. See Style 1 Handle, graphic 2.
■
To replace the handle, reverse the directions.
Style 2 Handle
■
To remove the handle, grasp the handle firmly, slide the
handle to the left and pull the handle straight out from the
drawer. See Style 2 Handle, graphic 2.
■
To replace the handle, position the handle so that the large
holes in the mounting clips are to the right and align the
holes with the door studs. Rotate the handle so that the
mounting clips are flat against the drawer and slide the
handle to the right to engage. See Style 2 Handle, graphic
2.
Remove Drawer Front
1.
Open the freezer drawer to full extension.
2.
Loosen the four screws attaching the drawer glides to the
drawer front. See Drawer Front Removal graphic.
NOTE:
Loosen screws three to four turns. Keep the screws
in the drawer front.
3.
Lift drawer front upward and off the screws. See Drawer
Front Removal graphic.
Replace Drawer Front
1.
Slide the drawer glides out of the freezer compartment.
Insert the screws in the top of the drawer front into the slots
in the drawer brackets. See Drawer Front Replacement
graphic.
2.
Pull the drawer brackets toward you to insert the two
screws in the bottom of the drawer front into the brackets.
See Drawer Front Replacement graphic.
3.
Completely tighten the four screws.
Final Steps
1.
Check all holes to make sure that hole plugs and screws are
in place. Reinstall top hinge cover as shown in Top Hinge
graphic.
2.
Plug into a grounded 3 prong outlet.
3.
Return all removable door parts to door and food to
refrigerator.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.