Amana AGR4230BA Installation Instructions - Page 15
To Convert Surface Burners
View all Amana AGR4230BA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
2. Remove the cap from the gas pressure regulator using a flat-blade screwdriver. NOTE: Make sure sealing washer remains in the same position. A 2. Locate Natural gas orifice spuds for top burners in the bag containing literature included with the range. Four Natural gas spuds are stamped "149." 3. Remove the LP gas orifice spuds using a 7 mm combination wrench. 4. Install the Natural gas orifice spuds using a 7 mm combination wrench. A. Cap 3. To convert to Natural gas, unscrew the plastic adjustment screw by hand, turn it over, and screw it in again. Inlet pressure to LP gas Inlet pressure to Natural gas A B 180º C A. Cap B. Sealing washer C. Adjustment screw 4. Reinstall the cap. To Convert Surface Burners 1. Remove burner grate, burner caps and burners. A B A. Spud B. Holder NOTE: The range cooktop is equipped with 4 standard burners. A C B D A B A. Burner cap B. Burner A. Standard burner - Natural gas orifice spud number 149 B. Standard burner - Natural gas orifice spud number 149 C. Standard burner - Natural gas orifice spud number 149 D. Standard burner - Natural gas orifice spud number 149 5. Place LP gas orifice spuds in the parts bag for future use and keep with the bag containing literature. 6. Reinstall burners, burner caps and burner grates. 15