Amana AMC2206BAS Installation Instruction - Page 2

INSTALLATION INSTRUCTIONS Tools and Parts Tools Needed Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. ■ Measuring tape ■ Pencil ■ Phillips screwdriver ■ Drill ■ 7/64" drill bit ■ Tape Parts Supplied Minimum Cutout Dimensions 23³⁄₄" (60.3 cm) 1 4.0 cm) 16⁷⁄₈" (42.9 cm) 3" (7.6 cm) Width 25" (63.5 cm) A 1.8 cm) B Duct base Left duct Bottom bracket Trim kit frame 12 Templates 1 and 2 Top bracket A. Trim kit frame overhang B. Cutout for lower oven NOTES: ■ Height, width and depth measurements have ±1/16" (2 mm) tolerance. ■ 3" (7.6 cm) minimum dimension is from lower oven cutout ceiling to microwave oven cutout floor. ■ Trim kit frame extends 11/16" (1.8 cm) below, and 1 4.0 cm) above the cutout opening. 13/16" screws (2) 9/16" screws (16) 1/2" screws (4 - painted) Location Requirements The microwave oven may be installed over a built-in oven. If installing over a built-in oven, make sure there is a minimum of 3" (7.6 cm) between the top of the lower oven cutout and the microwave oven cutout floor. The microwave oven may also be installed in a cabinet by itself (without a built-in oven below). For best usability, we recommend a minimum distance of 36" (91.4 cm) from the floor to the cutout floor. Make sure the surrounding cabinetry has clearance to open and close freely. Allow a clearance of at least 1" (2.5 cm) below the cutout floor (3" [7.6 cm] for installation above a built-in oven), and a clearance of at least 2" (5.1 cm) above the cutout opening. 2" (5.1 cm) 1" (2.5 cm) D E A B B C 36" (91.4 cm) 2" (5.1 cm) 3" (7.6 cm) Trim Kit Frame Dimensions 2296 7(658.6.3ccmm)*)** 19¹⁄₈" (48.6 cm) 24" (61.0 cm) 1 3.7 cm)* 2⁷⁄₈" (7.3 cm)** ⁷⁄₈" (2.2 cm) *27" (68.6 cm) trim kit **30" (76.2 cm) trim kit 3" (7.6 cm) A. Upper cabinet B. Microwave oven cutout C. Lower oven cutout D. Lower cabinets E. Floor 2