Amana NED4600Y Dimension Guide - Page 1
Amana NED4600Y Manual
View all Amana NED4600Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Electric Dryer PRODUCT MODEL NUMBERS NED4600Y, NED4700Y Installation clearances: The location must be large enough to allow the dryer door to open fully. Dryer Dimensions Minimum spacing for recessed area or closet installation Minimum Required Spacing 18"* (457 mm) 14" max.* (356 mm) 48 in.2* (310 cm )2 3"* (76 mm) 24 in.2 * (155 cm )2 1" 29" 1" 1"* 27¾" (25 mm) (737 mm) (25 mm) (25 mm) (705 mm) A B C A. Recessed area B. Side view - closet or confined area C. Closet door with vents *Additional spacing recommended 3"* (76 mm) *Most installations require a minimum 5½" (140 mm) clearance behind the dryer for the exhaust vent with elbow. See "Venting Requirements." Installation spacing for recessed area or closet installation The dimensions shown following are for the minimum spacing allowed. ■■ Additional spacing should be considered for ease of installation and servicing. ■■ Additional clearances might be required for wall, door, and floor moldings. ■■ Additional spacing of 1" (25 mm) on all sides of the dryer is recommended to reduce noise transfer. ■■ For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent ventilation opening are acceptable. ■■ Companion appliance spacing should also be considered. W10514172A 08/2013