Antec CP-850 Manual
Antec CP-850 Manual
 |
View all Antec CP-850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Antec CP-850 manual content summary:
- Antec CP-850 | Manual - Page 1
CP-850 POWER SUPPLY USER'S MANUAL - Antec CP-850 | Manual - Page 2
supported please visit www.antec.com/cp850. STANDARDS AND FEATURES The connectors and power specifications of the CP-850 PSU are all compatible with the ATX12V v2.3 and EPS12V v2.91 specifications. The CP-850 features Universal Input, which automatically senses when you connect the power supply - Antec CP-850 | Manual - Page 3
PLUS® Verification and Testing Report NVIDIA™ SLI™-READY CERTIFICATION Antec's CP Series power supplies are NVIDIA™ SLI™-Ready certified for use with multiple high-end graphics cards for superior parallel graphics processing. POWER OUTPUT The CP-850 power supply distributes power on separate rails - Antec CP-850 | Manual - Page 4
and improve airflow inside your case. For the list of connected and optional cables, see Table 2. THE MODULAR CABLE JACKS There are two black jacks and two red jacks on the back of your CP-850 PSU. These jacks are for the optional cables that come with your power supply. The black connectors are - Antec CP-850 | Manual - Page 5
4 Rail 3 INSTALLATION: 1. You will need to remove the standard PSU adapter plate from the Antec case to allow the larger PSU to fit. 2. Install the CP-850 PSU into your case with the four screws provided. 3. Connect the 24-pin main power connector to your motherboard. If your motherboard uses a 20 - Antec CP-850 | Manual - Page 6
8-pin connector. Note: Please also refer to your motherboard user's manual for any special instructions. 5. Connect extra cables from the cable pack to the sockets on the power supply only if needed. If you are going to plug the PCI-E cables into the PSU, they should go into the red sockets. If the - Antec CP-850 | Manual - Page 7
the preferred choice. More powerful cards use multiple connectors, including the advanced 8-pin PCI-E connector. The 8-pin PCI-E connector on your CP-850 can be used as either The SATA connector has an additional orange power wire. 9. When you have all the connections secured, turn the switch on the - Antec CP-850 | Manual - Page 8
tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Technical Support: US & Canada 1-800-22ANTEC [email protected] Europe +31 (0) 10 462-2060 [email protected] www.antec.com © Copyright 2009 Antec, Inc. All rights reserved. All trademarks are the property of their respective owners
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
CP-850
P
OWER
S
UPPLY
U
SER
’
S
M
ANUAL