Antec CP-850 Manual - Page 6
for PCI-E, then they can be used for any other type of cable supplied in the pack that accompanies - user manual
 |
View all Antec CP-850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
4. Connect the 8-pin or 4-pin connector for the CPU. If your motherboard has an 8-pin socket with a cover on some of the openings, we recommend that you remove the cover and use the 8-pin connector. Note: Please also refer to your motherboard user's manual for any special instructions. 5. Connect extra cables from the cable pack to the sockets on the power supply only if needed. If you are going to plug the PCI-E cables into the PSU, they should go into the red sockets. If the red sockets are not being used for PCI-E, then they can be used for any other type of cable supplied in the pack that accompanies the PSU. 6. Connect the AC power cord to the power supply AC inlet. Be sure to use the heavy-duty cord supplied with your CP-850.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
4.
Connect the 8-pin or 4-pin connector for the CPU. If your motherboard has an 8-pin socket with a cover on
some of the openings, we recommend that you remove the cover and use the 8-pin connector.
Note:
Please also refer to your motherboard user’s manual for any special instructions.
5.
Connect extra cables from the cable pack to the sockets on the power supply only if needed. If you are going
to plug the PCI-E cables into the PSU, they should go into the red sockets. If the red sockets are not being used
for PCI-E, then they can be used for any other type of cable supplied in the pack that accompanies the PSU.
6.
Connect the AC power cord to the power supply AC inlet. Be sure to use the heavy-duty cord supplied with
your CP-850.