Antec HCG-620M Manual - Page 6
the hardwired connector the preferred choice. More powerful cards use multiple connectors, including - cables
View all Antec HCG-620M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
4. Connect extra cables from the cable pack to the sockets on the power supply only if needed. If you are going to plug the PCI-E cables into the PSU, they should go into the red sockets. If the red sockets are not being used for PCI-E, then they can be used for any other type of cable supplied in the pack that accompanies the PSU. 5. Connect the AC power cord to the power supply AC inlet. Be sure to use the heavy-duty cord supplied with your PSU. 6. PCI-E graphics cards use different amounts of power. For some, a single 6-pin connector is sufficient, making the hardwired connector the preferred choice. More powerful cards use multiple connectors, including the advanced 8-pin PCI-E connector. The 8-pin PCI-E connector on the PSU can be used as either a 6- or 8-pin connector.