Apple M7649ZM User Manual - Page 15

The software is now installed and the monitor is ready for use. (To adjust your monitor, use the Monitors & Sound control panel, available from the Control Panels folder in the Apple [K] menu.) Important If you ever reinstall system software on your computer, you must also reinstall the Apple Displays Software. Safety Instructions Warning Do not clean any part of your display with a cleaner that contains alcohol or acetone, and never spray cleaner directly onto the screen. For more information about cleaning your display, see "Cleaning Your Monitor" on page 31. For your own safety and that of your equipment, always take the following precautions. Disconnect the power plug (by pulling the plug, not the cord) if any of the following conditions exists: m the power cord or plug becomes frayed or otherwise damaged m you spill something into the case m your display is exposed to rain or any other excess moisture m your display has been dropped or the case has been otherwise damaged m you suspect that your display needs service or repair m you want to clean the case or screen Important The only way to disconnect power completely is to unplug the power cord from the main power supply. Make sure at least one end of the power cord is within easy reach so that you can unplug the display when you need to. Be sure that you always follow these instructions: m Keep your display away from sources of liquids and moisture. m Don't set anything on top of the display. m Keep the display's vents free from obstruction. m Read all the installation instructions carefully before you plug your display into a power source. Warning Never remove the case from the monitor! You could come in contact with hazardous voltage. Electrical equipment may be hazardous if misused. Operation of this product, or similar products, must always be supervised by an adult. Do not allow children access to the interior of any electrical product and do not permit them to handle any cables. Setting Up 15