Apple M9470LL Setup Guide - Page 22
If Your AirPort Express Isn't Responding, To return your AirPort Express to its factory settings
UPC - 718908686782
View all Apple M9470LL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
If Your AirPort Express Isn't Responding Unplug it from the power outlet and plug it back in. If your AirPort Express stops responding completely, you may need to reset it to its factory settings. This erases all of the settings you've made and resets them to their original values. To return your AirPort Express to its factory settings: mm Use the end of a straightened paper clip to hold down the reset button for ten seconds. AirPort Express restarts with the following settings: ÂÂ AirPort Express receives its IP address using DHCP. ÂÂ The network name reverts to AppleNetwork xxxxxx (where x is a letter or number). ÂÂ The AirPort Express password reverts to public. If you previously used AirPort Utility to create profiles for your AirPort Express, they're preserved when you reset your AirPort Express. If you need to return your AirPort Express to its factory settings and remove any profiles you've set up: 1 Unplug AirPort Express. 2 Use the end of a straightened paper clip to hold down the reset button while you plug in AirPort Express. Wait until the status light flashes, and then reset the base station. 22 Chapter 4 Tips and Troubleshooting