Apple TW020LL/A User Guide - Page 243
Image is blurred or out of focus., Subject in recorded image is too dark.
UPC - 013803101218
View all Apple TW020LL/A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 243 highlights
241 Troubleshooting Memory card is not formatted correctly. z Format the memory card (pp. 16, 223). z If reformatting does not work, the memory card logic circuits may be damaged. Consult the nearest Canon Customer Support Help Desk. SD memory card or SDHC z Slide the write protect tab upward memory card is write (p. 259). protected. Image is blurred or out of focus. The camera moves when z Confirm the procedures in the shutter button is " appears" (p. 239). pressed. AF-assist Beam is set to [Off]. z In dark places where it is difficult for the camera to focus, the AF-assist Beam will emit to assist focusing. As the AF-assist Beam will not function when turned off, set it [On] to activate it (p. 55). Take care not to obstruct the AF-assist Beam with your hand when used. Subject is out of focal range. z Shoot with the subject at the correct focusing distance (p. 282). z The camera may be set to an unintended function (such as macro or manual focus). Cancel the setting. The subject is hard to focus on. z Use the focus lock, AF lock or manual focus to shoot (p. 127). Subject in recorded image is too dark. Insufficient light for shooting. z Raise the built-in flash to (Flash on) (p. 72). z Use a high-output externally mounted flash. The subject is underexposed because the surroundings are too bright. z Set the exposure compensation to a positive (+) setting (p. 136). z Use the AE lock or spot metering functions (p. 139).