Archos 500856 User Manual - Page 9

DVR Station Gen 5 User Manual - version 3 ▲! Before inserting the ARCHOS device into the DVR Station, always make sure that the ARCHOS is off! 2. Now insert your ARCHOS device (that is off) into the powered DVR Station. When the ARCHOS is on, press the TV/LCD button (or the TV button on the included remote control). Make sure that your TV is switched to the AV input that is used to connect the DVR Station:  The DVR Station will stop passing through the normal TV signals to the television and send sound and images from your ARCHOS device. If you can see the contents of the ARCHOS on your TV, you can move on to the next chapters.  If you cannot see the contents of the ARCHOS on your TV, or if the image is altered, try to modify the ARCHOS "TV Settings": - From the ARCHOS Home screen, select the "Settings" menu item, then choose "Display". - Change the following parameters: "TV Standard" - choose between the "NTSC (USA)" and "PAL (Europe)" systems (select the one that is compatible with your country's television system). "TV Format" - "4:3" or "16:9" - the format used by your television set to display images. - the option "Wide screen" becomes available when you set the "TV standard" parameter to "PAL (Europe)". "TV Connection" - select the type of video output ("Composite", "S-Video" or "RGB"), based on how you have connected the DVR Station to your TV. DVR Station Pass-through table The DVR Station will pass through the following video signals when the Archos device is not set to external display or is not placed in the DVR Station.