Ariens Platinum 30 Quick Start Guide - Page 14
Step Five: Install Remote, Deflector Control Cable
View all Ariens Platinum 30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Step Five: Install Remote Deflector Control Cable 1. Connect the barrel cable end to the chute deflector cable anchor before clipping the cable to the discharge chute cable bracket. 2. Route deflector remote cable along the left side of the chute pedestal. 3. Insert the barrel on the cable end into the bracket on left side of chute deflector. 4. Hold seal out of the way while routing the cable through the bracket on the left side of the discharge chute, and then push the cable fitting into the bracket. 5. Push the seal securely over the end on the cable fitting to prevent water from entering the cable. 6. Check deflector travel. Adjust nut on cable end under handlebar to obtain full travel, if necessary see Remote Deflector Control in Owners Manual.