Ariens Pro-24 Brush Cutter Owners Manual - Page 28
TROUBLESHOOTING, SERVICE PARTS, PROBLEM, PROBABLE CAUSE, CORRECTION, Wheel drive, does not, engage
View all Ariens Pro-24 Brush Cutter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
TROUBLESHOOTING PROBLEM Wheel drive does not engage PROBABLE CAUSE 1. Wheel drive control not engaged. 2. Wheel drive belts tension too loose. 3. Wheel drive belt worn or damaged. 4. Wheel drive control linkage detached or broken. 5. Bearings damaged. 6. Drive seems to slip or speed is too slow. Inadequate traction on sloped terrain. 7. Wheel drive rollers run in reverse. CORRECTION 1. Engage wheel drive control. 2. Check wheel drive belts tension. Adjust as necessary (see BELT TENSION ADJUSTMENT on page 20). 3. Replace belt (see BELT REPLACEMENT on page 22). 4. Check wheel drive control linkage. Adjust or replace as needed (see CHECK WHEEL DRIVE LEVER on page 15). 5. Contact your Dealer. 6. See WHEEL DRIVE ADJUSTMENTS on page 18. 7. Install wheel drive lower belt in correct orientation (see Wheel Drive Lower Belt Replacement on page 22). SERVICE PARTS Always use genuine Ariens parts to keep your mower running like new. Part Number Description 20000001 Air Filter 21534100 Spark Plug 04167500 Blade, 24" 07200538 Wheel Drive Upper Belt 07206000 Wheel Drive Lower Belt 07200604 Mower Blade Drive Belt GB - 28