Arlo Audio Arlo Doorbell Wirefree System Quick Start Guide - Page 15
Connect the doorbell battery cover to your existing chime
View all Arlo Audio manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Connect the doorbell battery cover to your existing chime a. Turn off the power to your current doorbell at the breaker. b. Remove your current doorbell. c. Connect the wires coming out of the wall to the terminals on the back of the Arlo doorbell battery cover with the provided screws. If the wires are too short, use the accessories that we provide. Battery cover Wire screw Current doorbell wires from your wall (Either wire can connect to either terminal.) 15
15
Battery cover
Current doorbell wires from your
wall (Either wire can connect to
either terminal.)
Connect the doorbell battery cover to your existing chime
a.
Turn off the power to your current doorbell
at the breaker.
b.
Remove your current doorbell.
c.
Connect the wires coming out of the wall to
the terminals on the back of the Arlo doorbell
battery cover with the provided screws.
If the wires are too short, use the accessories
that we provide.
Wire screw