Asko D3120 User manual Use & Care Guide EN - Page 12

TROUBLESHOOTING, continued Dishwasher does not drain properly ♦ Make sure that the cycle was complete before you opened the dishwasher. If not, allow it to complete and check again. ♦ Some water left in the sump area near the drain is normal. ♦ If the plumbing code in your area requires an air gap, make sure that the air gap isn't blocked or plugged. ♦ If the unit is connected to a garbage disposer, make sure the disposer is empty. ♦ If water backs up into the sink, check the garbage disposer and trap for blockage. ♦ Check the dishwasher filters and drain area for blockage. (See page 8.) ♦ Check for a kink in the drain hose. Dishwasher will not start ♦ Make sure the dishwasher is turned on and the door is closed securely. ♦ Check that the water supply is connected properly and the water is turned on. ♦ Make sure the power cord is properly plugged into the wall socket. ♦ Check your fuse box for a blown fuse or tripped circuit breaker. Dishwasher does not fill properly ♦ Make sure the water supply is turned on. ♦ Make sure the dishwasher is turned on and the door is closed securely. ♦ Check for crimps in the water feed line. ♦ The system is designed to detect an overflow. When it does, it shuts off the inlet valve and circulation pump and turns on the drain pump. (See "Overfill Protection" on page 9.) Page 12