Asko D3331 User manual Use & Care Guide Asko D3331 EN - Page 7

OPERATING INSTRUCTIONS THE CONTROL PANEL Your ASKO dishwasher has a button-operated control panel, as illustrated below. To select a wash program or option, simply press the Program button until the indicator light for the desired program comes on, press the desired option buttons, then press Start/Stop. Power button (on the top side of the control panel) Program button Program indicator lights Start/Stop button Display window Option buttons Start/End indicator light PROGRAMS To select a program, simply press the program button until the indicator light for the desired program glows. The programs are described below: "The Normal Wash program is used Pots and Pans (170°/Sani or 140° F) for energy testing and should be used for normal or lightly soiled For the heaviest soiled loads, such as casseroles, sauce pans, etc. loads. When washing dishes that Heavy Wash (160° F or 130° F) For heavily soiled loads, such as pots, pans, casseroles, etc. are more heavily soiled, use a longer program with higher temperatures such as Heavy Wash Normal Wash (130° F or 140° F) or Pots and Pans." For normally soiled loads, such as plates, glasses, bowls, and lightly soiled pans. Delicate Wash (105° F or 120° F) For delicate items, such as fine china and crystal, that are washed immediately after use. When using this program, you should set the temperature to low and dry the dishes without heat. Quick Wash (85° F or 120° F) For lightly soiled loads that are washed immediately after use. This program can also be used for delicate items, but you should set the temperature to low and dry the dishes without heat. Rinse and Hold To rinse dishes that you plan to wash later that day. OPTIONS To select an option, simply press the appropriate option button. The options are described below. Temperature The dishwasher has two temperature options for each wash program, as shown above. When this button is set on the high temperature, the main wash and final rinse are heated to the higher temperature for the selected program. If it is set to low, the main wash and final rinses are heated to the lower temperature. The indicator light will glow only when the higher temperature is selected. Delayed Start This button allows you to delay starting the dishwasher from 1 to 12 hours. Press this button until the desired number of hours displays then press Start. If you change your mind before you press Start, continue to press this button until the Delay Start indicator light goes off. The indicator light will glow when Delay Start is selected. To cancel Delay after you press Start, hold down the Start/Stop button for three seconds. Drying This option speeds up the drying process by raising the temperature in the final rinse to 160° F to heat the dishes and tank before the drying cycle begins. The indicator light will glow only when this option is activated. POWER BUTTON Use this button to turn the main power to the unit on and off. Refer to the illustration above to see the location of the power button. START/STOP BUTTON Once you have selected the wash program and temperature and drying options, press this button to start the dishwasher. (Make sure the door is securely closed.) Page 7