Asko D3731 User manual D3731 Use & Care Guide EN - Page 6

OPERATING INSTRUCTIONS THE CONTROL PANEL Your ASKO dishwasher has our state-of-the-art electronic control panel, as illustrated below. Start/Stop button Power button Program button Display window Programming buttons DISPLAY WINDOW The display window shows the programs, options, remaining program time and fault codes. It also allows you to access the program menus and customize the wash programs. If you select Delayed Start, the window will display the number of hours selected. When you press Start/Stop, the countdown time displays. Remaining program time - The remaining program time is calculated by the time it took the program to run last time. (Note: The first time you run a program, the display will display 1:00.) As the program progresses, the time remaining displays the hour and minutes (e.g., 1:02, which means one hour and two minutes.) PROGRAMS To select a program, simply press the program button until the program you desire displays then press Start/Stop. The programs are described below. You can also change certain program features. See "Options" below. Heavy Wash (Cold, 85° - 170°/Sani F) For heavily soiled loads, such as pots, pans, casseroles, etc. Normal Wash (Cold, 85° - 170° F) For normally soiled loads, such as plates, glasses, bowls, and lightly soiled pans, use the Normal wash program with 150°F and normal drying To save more water and energy use 130°F and economy drying. Glass Wash (Cold, 85°- 140° F) For glasses and delicate items, such as fine china and crystal, that are washed immediately after use. When using this program, you should set the temperature to low and dry the dishes without heat. Quick Wash (Cold, 85° - 140° F) For lightly soiled loads that are washed immediately after use. This program can also be used for delicate items, but you should set the temperature to low and dry the dishes without heat. Pots and Pans (Cold, 85°- 170° F) For the heaviest soiled loads, such as casseroles, sauce pans, etc. Rinse and Hold To rinse dishes that you plan to wash later that day. OPTIONS Once you have selected a program, you can change some of the program features by using the options (described below). To select an option, simply press the Menu button until the option you desire displays, then press the Set button until the desired setting displays. Press Menu to confirm your selection. You can continue to make programming changes or press Start/Stop to start the program. Delayed Start This option allows you to delay starting the dishwasher from 1/2 hour to 24 hours. Press the Menu button until Delayed Start displays, then press Set until the number of hours you wish to delay starting the dishwasher displays along with a flashing clock symbol. Press Menu then press Start/Stop. To cancel Delay after you press Start/Stop, hold down the Start/Stop button for three seconds. If you change your mind before you press Start/Stop, continue to press the Set button until "0:00" is displayed. Temperature The temperature can be changed in all programs, except Rinse and Hold. Your choices are: cold, 85°, 105°, 120°, 130°, 140°, 150" 160°, and 170° F. (Note: The Glass , Quick wash and Rinse & Hold programs cannot be set over 140° F.) To select a temperature, press the Menu button until Temperature displays, then press the Set button until the desired setting displays. Press Menu to confirm your selection. When you select 170° F, the word "Sani" displays. Page 6