Asko D5220 User manual D5220 Use & Care Guide EN (Products Manufactured Af - Page 22

Settings Setting a signal If you want the machine to signal when the wash is complete, you can program it to do this. The machine is set without a signal by default. 1. Switch off the dishwasher at the main switch. 2. Hold in the Delayed start button at the same time as you press the main switch. The button flashes. Release the but- ton. PROG 3. Press the Program button - when the Daily wash symbol lights, the signal is activated. START 4. S TOP Press the Start/Stop button and the setting will be stored until next time you want to make a change. or Reset 1. Switch off the dishwasher with the main switch. 2. Hold in the Delayed start button at the same time as you press the main switch. The button flashes. Release the button. PROG 3. START 4. S TOP Press the Program button - when the Daily wash symbol goes out, the signal is deactivated. Press the Start/Stop button and the setting will be stored until next time you want to make a change. Customer Care Center 22 1-800-898-1879 www.askousa.com