Asko D5434 User manual 8090772 Asko D5434 XXL EN - Page 16

Select options, Press Start/Stop

Get Asko D5434 PDF manuals and user guides View all Asko D5434 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Dishwashing 6Select options To select an option, press one of the option buttons. The field next to the button lights when the option is activated. The available options depend on the selected program. Once you have started the program, the options you selected are saved for the next time you use the same program. An exception is the Delayed start option. High temperature Activate this option for improved dishwashing results. The machine then uses a higher temperature for the main wash. If you want to use the lower temperature, press until the field next to the button turns off. You can vary the temperature as shown below: Heavy wash: 130 °F (55 °C)/ 160 °F (70 °C) Normal wash: 130 °F (55 °C)/ 150 °F (65 °C) Daily wash: 140 °F (60 °C)/ 150 °F (65 °C) Quick wash: 85 °F (30 °C)/ 140 °F (60 °C) Eco wash: 120 °F (50 °C)/ 140 °F (60 °C) Long dry A higher temperature in the final rinse and a longer drying phase improves the drying result if you activate the Long dry option. This causes a slight increase in energy consumption. If you want a program with Short dry, press so that the field next to the button turns off. Delayed start When you select Delayed start, the dishwasher will start 1-24 hours after you press the Start/Stop button. 1. Press the button once to activate Delayed start. Press the button several times - or hold it in - to set the desired number of hours. 2. Press Start/Stop and the dishwasher counts down 1 hour at a time and starts after the selected delay. Press and hold Start/Stop for five seconds if you want to cancel the Delayed start option. NOTE! Remember to press the Start/Stop button to start the program. 7Press Start/Stop The display flashes three times with the remaining time to indicate that the program has started. Close the door properly, otherwise the dishwasher will not start. The display indicates if the door is open. NOTE! If the machine does not start within 2 minutes of the last button press, the display returns to showing the last program run. Stopping or changing a program If you want to change programs after starting the dishwasher, open the door then press and hold Start/Stop for five seconds. Add more detergent if the lid of the detergent dispenser has opened. Then choose a new program, press Start/Stop, and close the door. Do you want to add more dishes? Open the door. The dishwasher stops automatically. Add the dishes, close the door, and the dishwasher resumes the program. 16 Customer Care Center 1-800-898-1879 www.askousa.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
6
Select options
To select an option, press one of the option
buttons. The field next to the button lights when
the option is activated. The available options depend
on the selected program. Once you have started the
program, the options you selected are saved for the
next time you use the same program. An exception
is the Delayed start option.
High temperature
Activate this option for improved dishwashing results.
The machine then uses a higher temperature for the
main wash.
If you want to use the lower temperature, press until
the field next to the button turns off.
You can vary the temperature as shown below:
130 °F (55 °C)/ 160 °F (70 °C)
Heavy wash:
130 °F (55 °C)/ 150 °F (65 °C)
Normal wash:
140 °F (60 °C)/ 150 °F (65 °C)
Daily wash:
85 °F (30 °C)/ 140 °F (60 °C)
Quick wash:
120 °F (50 °C)/ 140 °F (60 °C)
Eco wash:
Long dry
A higher temperature in the final rinse and a longer
drying phase improves the drying result if you activate
the Long dry option. This causes a slight increase in
energy consumption.
If you want a program with Short dry, press so that
the field next to the button turns off.
Delayed start
When you select Delayed start, the dishwasher will
start 1-24 hours after you press the Start/Stop button.
1. Press the button once to activate Delayed start.
Press the button several times – or hold it in – to
set the desired number of hours.
2. Press Start/Stop and the dishwasher counts down
1 hour at a time and starts after the selected delay.
Press and hold Start/Stop for five seconds if you want
to cancel the Delayed start option.
NOTE!
Remember to press the Start/Stop button to start
the program.
7
Press Start/Stop
The display flashes three times with the
remaining time to indicate that the program has
started. Close the door properly, otherwise the
dishwasher will not start. The display indicates
if the door is open.
NOTE!
If the machine does not start within 2 minutes of the
last button press, the display returns to showing the
last program run.
Stopping or changing a program
If you want to change programs after starting the
dishwasher, open the door then press and hold
Start/Stop for five seconds. Add more detergent if the
lid of the detergent dispenser has opened. Then
choose a new program, press Start/Stop, and close
the door.
Do you want to add more dishes?
Open the door. The dishwasher stops automatically.
Add the dishes, close the door, and the dishwasher
resumes the program.
Customer Care Center
16
1-800-898-1879
www.askousa.com
Dishwashing