Asko DBI675IXXLS Instructions for installation - Page 5
Warning
View all Asko DBI675IXXLS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Connection to cold water supply Connect the dishwasher to the cold water supply if the building is heated using oil, electricity, or gas. Connection to hot water supply Connect the dishwasher to the hot water supply (max. 140 °F (60 °C)) if the building is heated using an energy-efficient means such as district heating, solar power, or geothermal power. Choosing a hot water connection cuts dishwashing times and reduces the dishwasher's energy consumption. NOTE! Do not exceed the permitted water supply temperature. Certain materials used in some cookware cannot withstand strong heat. Electrical connection Information about the electrical connection can be found on the serial number plate. This specification must match the electricity supply. The power supply receptacle for the appliance must be installed in a cabinet or on a wall adjacent to the undercounter space in which the appliance is to be installed. Do not use an extension cord for this appliance. The access hole for the the electrical supplie must be round and smooth and no bigger than 1 1/2'' in diameter. If the partition is metal, it needs to be covered with an edge protector. Use caution when the appliance is installed or removed to reduce the likelihood of damage to the power supply cord. Grounding Instructions This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord fitted with an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances. WARNING! Improper connection of the equipment grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the outlet, have an appropriate outlet installed by a qualified electrician. Screwing the dishwasher into place (Applicable only to built-in dishwashers.) 2x After fastening the machine, check that the front feet still touch the floor. Screw the dishwasher into place with two extra screws If there is an air gap of more than 1/8'' between the underside of the countertop and the top edge of the dishwasher, the dishwasher ought to be screwed into place with two extra screws. KNOCK OUT 2x 5