Asko DBI675THXXLS Use and Care Guide - Page 18

Activate the Extra Dry option.

Page 18 highlights

Problem Possible causes Action Water remains in the dishwasher above the filters. The filters are blocked. Clean the coarse and fine filters. The filters are not fitted correctly. Check that the filter handle is locked in the stop position. The handle should point straight out from the dishwasher. Debris in the drain pump. Clean the drain pump. See the chapter Care and maintenance instructions. Kink in drain hose. Check that the hose is free from kinks and sharp bends. Blocked drain hose. Loosen the drain hose from where it terminates. Check that no debris has clogged the hose. Is the cone-shaped part of the drain boot cut to the maximum size of the fitting where it attaches? Bad odor in dishwasher. Dirt around the seals and in corners. Clean with dish brush and low foaming cleaner. Low temperature programs have been selected Run a program with a higher temperature once for a prolonged period. or twice a month. Or run a self-cleaning program. See Self-cleaning in the chapter Using the dishwasher. The dishwasher is connected to a garbage disposer. Cleaning the garbage disposer connected to the dishwasher can eliminate odors. Follow the disposer manufacturer's cleaning instructions. The dishes are not dry enough. Depending on the load, the program's drying Activate the Extra Dry option. cycle may be insufficient. The dishwasher is not fully loaded. Fully load the dishwasher. Rinse aid needs topping up or dosage is set too Top up with rinse aid or increase the rinse aid low. dosage level. See the chapter Settings. Open the door a little once the program has finished. 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

Action
Possible causes
Problem
Clean the coarse and fine filters.
The filters are blocked.
Water remains in the dishwasher above the filters.
Check that the filter handle is locked in the stop
position. The handle should point straight out
from the dishwasher.
The filters are not fitted correctly.
Clean the drain pump. See the chapter Care and
maintenance instructions.
Debris in the drain pump.
Check that the hose is free from kinks and sharp
bends.
Kink in drain hose.
Loosen the drain hose from where it terminates.
Check that no debris has clogged the hose. Is
the cone-shaped part of the drain boot cut to the
maximum size of the fitting where it attaches?
Blocked drain hose.
Clean with dish brush and low foaming cleaner.
Dirt around the seals and in corners.
Bad odor in dishwasher.
Run a program with a higher temperature once
or twice a month. Or run a self-cleaning program.
See Self-cleaning in the chapter Using the
dishwasher.
Low temperature programs have been selected
for a prolonged period.
Cleaning the garbage disposer connected to the
dishwasher can eliminate odors. Follow the
disposer manufacturer's cleaning instructions.
The dishwasher is connected to a garbage
disposer.
Activate the Extra Dry option.
Depending on the load, the program's drying
cycle may be insufficient.
The dishes are not dry enough.
Fully load the dishwasher.
The dishwasher is not fully loaded.
Top up with rinse aid or increase the rinse aid
dosage level. See the chapter Settings.
Rinse aid needs topping up or dosage is set too
low.
Open the door a little once the program has
finished.
18