Asko Kalamazoo User manual 8094232 Kalamazoo Outdoor EN - Page 21

Dishwashing Time remaining Once you have selected a program and options, the display indicates how long the program took the last time it was used. The remaining time is updated after the water for the final rinse has been heated. This may differ somewhat from time to time depending on the temperature of the water supply, the amount of dishes, the ambient temperature, and other factors. NOTE! During the first run of each program, the remaining time displayed can be slightly misleading, as the dishwasher is estimating the time. When you run the program a second time, the dishwasher will calculate the remaining time based on the previous duration of the program. Stopping or changing a program If you want to change programs after starting the dishwasher, open the door then press and hold Start/Stop for three seconds. Add more detergent if the lid of the detergent dispenser has opened. Then choose a new program, press Start/Stop, and close the door. Do you want to add more dishes? Open the door. The dishwasher stops automatically. Add the dishes, close the door, and the dishwasher resumes the program. If the dishwasher is turned off using the main power switch or due to a power failure If the program was not finished, the interrupted program resumes when power is restored. NOTE! During drying, the program is interrupted if the power is cut or the door is open for more than 2 minutes. 8After dishwashing Once the program has finished and the door is opened, "End" appears on the display. A buzzer also sounds at the end of the program. See the section Settings, which describes how to change this function. Once the dishwasher has finished, it uses only standby power. Turn off the dishwasher using the main power switch if you want to completely cut the power. Turn off the water supply valve after each use. Customer Care Center 19 1-800-898-1879