Asko T411VDW Use and Care Guide English - Page 25
Step 5
View all Asko T411VDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
STEP 5: CHOOSING THE PROGRAM SETTINGS Using the program settings, the drying programs can be further adjusted to your preferences. Some program settings may not be available for your selected program. Selected program settings will remain stored after the end of the drying cycle and may be changed subsequently (except for delayed start which is not stored after the drying is complete). 1. Dryness level (extra dry) 2. Anti-crease 3. Load 1 2 34 56 4. Lower drying temperature (gentle dry) 5. Time (timed drying) 6. Delay Start Choose the program settings before pressing the START button. When the drying program is in progress, program settings cannot be changed. Press and hold the button under a program setting to display the information (INFO) about it. Following are the program settings that may be selected using the buttons 1 to 6: 1. Dryness level (extra dry) By pressing the button 1, you can choose between extra dryness levels Each time the button is pressed, the final level of laundry dryness and drying time will change. 2. Anti-crease This function pertains to what happens after the drying cycle. By pressing the button 2, you can choose the duration of the anti-crease program from 0 hours to 4 hours , in 1-hour increments. 3. Load By pressing the button 3, you can choose between loads of the dryer. Full load Small load Partial load Selection of actual load affects the initially displayed anticipated drying time. 4. Lower drying temperature (Gentle dry) Press the button 4 to switch the gentle dry function on (ON) or off (OFF). Customer Care Center, 1-800-898-1879, www.askona.com 25