Asko T701 User manual Use & Care Guide EN - Page 17
T761 And, And T781 Opera, T781 Opera, T781 Operating Instr, Ting Instr, Ting Instructions, Uctions
View all Asko T701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
ENGLISH T761 AND T781 OPERATING INSTRUCTIONS WARNING! To reduce the risk of electric shock or injury to persons, read the "Important Safety Instructions" section on page 2 before operating this appliance. THE CONTROL PANEL Power Button Press to turn power to the machine on and off. Preset Programs Press one of these buttons to select a program. LCD Window Displays the program, temperature settings, and program run time. Power Indicator Light Glows when the power is turned on. P1 P2 P3 P4 Start Stop Start Button Press to start a program. Stop Button Press to stop a program. Program Selection Controls These buttons allow you to customize the preset program settings, such as temperature settings, turning the buzzer off, setting delay start time, etc. POWER BUTTON The Power button turns the power to the machine on and off. When the power is on, the power indicator light glows red. The power must be on before you can set the programs or start the machine. START BUTTON Once you have selected a program (P1-P4) and set the desired options, press this button to start the dryer. STOP BUTTON You can stop or cancel a program by pressing Stop until the dryer stops (about three seconds). If you stop the dryer this way, it cancels the program in progress. INTERRUPTING OR CANCELLING A PROGRAM To interrupt a program, simply open the door. The dryer will stop tumbling automatically. To continue the program, close the door and press Start. The program will continue from the point it was interrupted. To cancel a program, press and hold the Stop button until the dryer stops (about three seconds). To restart the dryer, you will have to reselect a program and press Start. UNDERSTANDING THE LCD WINDOW The LCD window is easy to read and understand. The illustration below explains each item on the LCD window. The LCD window also displays the menus and options available when you customize the preset programs (see page 18). Program When you press the Power button, the display toggles between the program numbers and the program names, (e.g., Extra Dry, Dry, etc.) P1 Extra Dry P2 Dry P3 Normal Dry P4 Iron Dry Program Time When you start a program, the total time the program runs is displayed. As the program progresses, the time remaining displays. The program time toggles between minutes (e.g., 23) and hours (e.g., 1h). Preset Programs Displays the program that is selected/running. Start Indicates that you pressed Start and the program is running. Stop Indicates that the program has ended or that you pressed Stop. Page 17