Asko T711 User manual Use & Care Guide EN - Page 14
T731 Opera, T731 Operating Instr, Ting Instr, Ting Instructions, Uctions
View all Asko T711 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
T731 OPERATING INSTRUCTIONS WARNING! To reduce the risk of electric shock or injury to persons, read the "Important Safety Instructions" section on page 2 before operating this appliance. THE CONTROL PANEL Power Button Turns power to the machine on and off. Power Indicator Light Glows when the power is turned on. Power Time set Wrinkle free Delay Temperature Signal Quick cool-down LED Window Displays program number, dry time selected, remaining program time, etc. Iron dry Timed dry Air fluff Programs Heavy Normal Delicate Start Button Press to start a program. Program Knob Turn to select a program. Option Buttons Press to select a program option. Stop Button Press to stop a program. POWER BUTTON The Power button turns the power to the machine on and off. When the power is on, the power indicator light glows red. The power must be on before you can start the machine. PROGRAM KNOB Turn this knob to select a program. The programs are described on the following page. 12:00 Position - This is where the line on the knob aligns with the line above the knob. When the knob is in this position, "00" displays on the LED to indicate no program has been chosen. START BUTTON After you have selected a program and the desired options, press this button to start the dryer. The red indicator light next to the Start button will come on. The indicator light will go off when the program ends or has been cancelled. STOP BUTTON You can stop or cancel a program by pressing and holding the Stop button until the dryer stops. When you press Start, the program will start from the beginning. INTERRUPTING OR CANCELLING A PROGRAM To interrupt a program, simply open the door. The dryer will stop tumbling automatically. To continue the program, close the door and press Start. The program will continue from the point it was interrupted. To cancel a program, press and hold the Stop button Page 14 until the Stop indicator light goes off (approximately 3 seconds). You will have to reselect a program and press Start to restart the dryer. LED WINDOW The LED window displays the program number for the Sensidry programs, as illustrated below: P1 The corresponding program numbers are: Heavy = P1 Normal = P2 Delicate = P3 Iron Dry = P4 When you select Timed Dry, the LED displays the number of minutes selected, plus the cool-down time, as illustrated below: 20 When you select Air Fluff, the LED displays the number of minutes selected, as illustrated above. With both programs 5 and 6, as the program advances, the LED displays the remaining time. "End" on the LED indicates the program is complete. "C" indicates the program is in the cool-down cycle.