Asko T712 User manual 80 811 93 Asko T712 EN - Page 21
Installation instructions
View all Asko T712 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Installation instructions C. Built-in ASKO dryers can be installed beneath a cabinet or worktop with a minimum height of 34" (864 mm). There must be a gap of about 1/2" (12 mm) all around the machine, including between the rear edge of the machine top panel and the back wall. The opening width must be at least 24-1/2" (622 mm). The condensing models work best when they have good air circulation. Install the dryer so the condensed water will continuously flow into a drain or sink, you will need a drain outlet behind the unit. The maximum drain height is 40" (1016 mm). Notes The height adjustment for the dryer is 33-1/2" to 34-1/2" (850 mm to 876 mm). Do not raise it higher than 34-1/2" (876 mm). Hole measurements are from center of hole. Customer Care Center 21 1-800-898-1879 www.askousa.com