Asko T744 User manual 8092845 Asko T744T EN - Page 20
Adjusting the feet, Built-in
View all Asko T744 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installation instructions Adjusting the feet Screw the feet in or out so that the tumble dryer is both stable and level. NOTE! The height adjustment for the dryer is 33-1/2" to 34-1/2" (850 mm to 876 mm). Do not raise it higher than 34-1/2" (876 mm). Hole measurements are from center of hole. Built-in ASKO dryers can be installed beneath a cabinet or worktop with a minimum height of 34" (864 mm). There must be a gap of about 1/2" (12 mm) all around the machine, including between the rear edge of the machine top panel and the back wall. The opening width must be at least 24-1/2" (622 mm). The condensing models work best when they have good air circulation. Install the dryer so the condensed water will continuously flow into a drain or sink, you will need a drain outlet behind the unit. The maximum drain height is 40" (1016 mm). 20 Customer Care Center 1-800-898-1879 www.askousa.com