Asko T793 User manual 80 834 26 Asko T793 EN - Page 25

Installation instructions WARNING! WARNING - Risk of fire. Install the clothes dryer according to the manufacturer's instructions and local codes. Do not install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is installed, it must be of a specific type identified by the applience manufacturer as suitable for use with clothes dryers. Flexible venting materials are known to collapse, be easily crushed, and trap lint. These conditions will obstruct clothes dryer airflow and increase the risk of fire. To reduce the risk of of severe injury or death, follow all installation instructions. Save these instructions for future reference. A. Freestanding The tumble dryer can be positioned beside the washing machine. B. Stacked The tumble dryer can be placed on top of a ASKO washing machine. To stack the dryer, you need the stacking attachments (foot cups and anti-tip devices) that come with the machine: You will find 2 foot cups in a bag in the drum and 2 anti-tip devices attached to the bottom left corner at the back of the machine. Extension plates can be ordered from your local retailer. Positioning the tumble dryer The tumble dryer can be freestanding or stacked. Remember that the tumble dryer produces heat and should therefore not be located in a room that is too small. If the room is very small, drying will take longer due to the limited quantity of air. Caution! For proper ventilation, the machine should not be installed behind a door. Caution! The vent on the bottom of the front of the dryer must not be blocked by a carpet or rug. Tip! If the unit must be installed behind a door should be louvered. To improve ventilation, the door where the tumble dryer is located should be left open when the dryer is in use. Caution! Clothes dryer installation must be performed by a qualified installer. Customer Care Center 1-800-898-1879 www.askousa.com 25